Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- Selecting further settings
- The optimum temperature and air quality
- Temperature and door alarm
- Feature lighting
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Active AirClean filters
- Problem solving guide
- Noises
- Miele@home
- After Sales / Guarantee
- Information for test institutes
- Information for dealers
- Electrical connection
- Installation
- Changing the door hinging
Information for dealers
51
Demo mode
The wine conditioning unit can be
demonstrated in the showroom or at
exhibitions in "Demo mode". In this
mode the control panel and interior
lighting are active but the compressor
remains switched off, so that the appli-
ance does not cool down.
Switching on demo mode
Switch the wine conditioning unit off
by touching the On/Off sensor.
The sensors for the three wine condi-
tioning zones will then go out. The tem-
perature display will go out and the
mains connection symbol will ap-
pear.
Place your finger on the sensor,
and leave it there.
At the same time, briefly touch the
On/Off sensor (without letting go of
the sensor).
Leave your finger on the sensor
until the symbol appears in the dis-
play.
Then release the sensor.
Demo mode is activated and the sym-
bol appears in the display.
Switching off Demo mode
The symbol is lit up in the display.
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes.
Touch the OK sensor to confirm your
selection.
1 flashes in the display (means: Demo
mode is switched on) and the symbol
lights up.