Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Switching on and off
- Selecting further settings
- The optimum temperature and air quality
- Temperature and door alarm
- Feature lighting
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Active AirClean filters
- Problem solving guide
- Noises
- After sales service and warranty
- Installation
- Information for dealers
Installation
*INSTALLATION*
56
Installation dimensions
The mains connection cable is
2300mm long.
The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
Installing the wine conditioning
unit
Before installing the wine condition-
ing unit
Take any accessories out of the appli-
ance.
Remove the cable clip from the back
of the appliance (depending on
model).
Risk of damage and injury from
wine conditioning unit tipping over.
There is an increased risk of injury
and damage if the wine conditioning
unit is installed by a single person.
Two people are required for installing
the wine conditioning unit.
Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
The building-in niche must be hori-
zontally and vertically aligned.
The required ventilation gaps must be
provided (see “Installation” – “Ventila-
tion” and “Building-in dimensions”).