Operating instructions/Installation instructions

Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
52
Climate range
The wine conditioning unit is designed
for use within a certain climate range
(ambient temperatures) and should not
be used outside this range. The climate
range of the wine conditioning unit is
stated on the data plate inside it.
Climate range Ambient room
temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the wine conditioning unit to
rise which could lead to damage.
 Risk of damage due to corrosion.
In environments with high humid-
ity, condensation may appear on the
external surfaces of the wine condi-
tioning unit. Condensate can cause
corrosion on external appliance pan-
els.
Install the wine conditioning unit with
sufficient ventilation in a dry and/or
air-conditioned room.
After installation, make sure that the
appliance door closes properly, the
ventilation gaps are not covered and
that the wine conditioning unit has
been installed in accordance with
these installation instructions.
Ventilation
 Risk of fire and damage due to
insufficient ventilation.
If the wine conditioning unit is not
ventilated sufficiently, the com-
pressor will run more frequently and
for longer periods. This will result in
increased energy consumption and a
higher operating temperature for the
compressor. This may, in turn, cause
damage to the compressor.
Please ensure that there is adequate
ventilation around the wine condi-
tioning unit.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.