Pre-finished 24” MasterCool K 2601 SF F 2671 SF KWT 2601 SF / KWT 2611 SF KWT 2661 SFS Shown: KWT 2661 SFS Please note: This information is subject to change 8mieleusa.
Pre-finished 24” MasterCool SPECIFICATIONS Overall Unit Dimensions 233/4” (603 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Excludes Fascia Dimension] Overall Fascia Dimensions 241/2” (622 mm) W x 84”- 8511/16” (2134 - 2175 mm) H x 11/2” (32 mm) D Niche Minimum Cabinet Niche Opening Electrical Electrical Requirements 24” (610 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 24” (610 mm D K 2601 SF KWT 26x1 SF(S) 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separa
Pre-finished 24” MasterCool CUTOUT DIMENSIONS Please note unit’s outer SF frame. Top view: Niche/Cabinetry 3/4” (19) Stainless steel door 9/32” (7) SF frame CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor.
Pre-finished 24” MasterCool POWER SUPPLY AND WATER CONNECTION (Water Connection For F 2671 SF Only) Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Pre-finished 24” 1MasterCool 15° Door HINGING ThDETAILS ickne115° ssOPENING options 0-1/8" Available for the following models: • K 2601 SF • F 2671 SF • KWT 26x1 SF(S) 0-1/8” (3 mm) 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 90° Door 115° Door Thickness options 0-3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) Cabinet Front binet Front 0-3 /4” mm ) 3”(76.2mm) 1-3/4”(44.
Pre-finished 9MasterCool 0° Door 24” Thickness options Thickness HINGING DETAILS 90° OPENING 0-1/8” (3 mm) 1-3/16” (30mm) 1-7/16” (36.5mm) Thickness options 115° Door 0-1/8" Thickness options1-11/16” (43mm) 115° Door 1-1/2" 1-3/4" 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 2” (51 mm) 2" 90° Do7/16” r (11omm) Thickness options 90° Door 0-1/8" Available for the following models: • K 2601 SF • KWT 26x1 SF(S) 1-15/16” (49.
