Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Installation dimensions
- Dimensions of the cabinet front
- Installing the wine conditioning unit
- Before starting...
- Tools required
- Weight of door front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the wine conditioning unit into the niche
- Aligning the wine conditioning unit
- Securing the wine conditioning unit in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Fitting the door trim
- Securing the toe-kick ventilation grille and toe-kick panel
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching the wine conditioning unit on and off
- Selecting additional settings
- The ideal temperature and humidity
- Door alarm
- Storing wine bottles
- SommelierSet
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
33
Tip: Secure the power cord to prevent it
becoming caught: tie a piece of string
to the middle of the power cord and as
the wine conditioning unit is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
Push the wine conditioning unit care-
fully into the installation niche.
If the wine conditioning unit cannot
be pushed into the niche (because
the floor is uneven, for example), un-
screw the rear feet slightly (see “In-
stallation – Aligning the wine condi-
tioning unit”) and slide the appliance
into the installation niche.
Remove the edge protection from
the adjacent cabinet fronts.
Aligning the wine conditioning unit
The installation aids on the appli-
ance door provide assistance with the
alignment of the wine conditioning unit
in the installation niche.
The installation aids are suitable for a
cabinet front thickness of 3/4" or
1 1/2" (19mm or 38mm).
Align the wine conditioning unit with
adjacent cabinet fronts as described
below.
Cabinet-front thickness of 3/4" (19mm)