Operating and Installation instructions

Before first use
60
Before first use
Allow the wine conditioning unit to
stand for approx. 1hour prior to con-
necting it to the power supply.
This will help prevent any malfunc-
tions.
Packaging material
 Remove all packaging material from
the inside of the wine conditioning
unit.
Always remove all packaging mate-
rial, including adhesive tape, before
switching on the wine conditioning
unit. The adhesive tape is difficult to
remove from cold surfaces.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
 Clean the inside of the wine condi-
tioning unit and the accessories.
Choosing the right Door Assistant
(Push2Open/Pull2Open)
The Door Assistant helps you to open
the appliance door.
You can choose between the two Door
Assistants Push2Open and Pull2Open
(see “Selecting additional settings –
Switching on the Door Assistant ”).
The default Door Assistant is
Push2Open.
 Select the
Pull2Open Door Assistant if your wine
conditioning unit has a cabinet front
with a handle.
 Select the
Push2Open Door Assistant if your
wine conditioning unit has a handle-
free cabinet front.
Using the SommelierSet
 “The SommelierSet” describes how
to use the SommelierSet.
Miele@home
Your wine storage unit is equipped
with an integrated WiFi module.
Networking is deactivated at the fac-
tory.
To use this feature, you will need:
- a WiFi network
- the Miele app
- a Miele user account You can create
a user account via the Miele app.
The Miele app will guide you as you
connect your wine storage unit to your
home WiFi network.