Operating and Installation Guide
Active AirClean filter
48
To confirm the filters have been
changed,
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly until
the symbol flashes in the display.
Touch the OK sensor to confirm your
selection.
Thesymbol flashes in the display
(meaning: Active AirClean filter is in-
stalled in your wine conditioning unit),
the symbol lights up.
Touch the sensors for setting the
temperature (or) until the sym-
bol is displayed (meaning: the
counter has been reset).
Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and thesymbol will flash.
Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after ap-
proximately one minute.
Thein the display goes out.