Operating and Installation Guide
Installing the wine conditioning unit
71
Warning! Do not drop the appli-
ance. Risk of injury and damage.
Two people are required for installing
this wine conditioning unit.
Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
The niche must be horizontally and
vertically aligned.
The required air vent cross-sections
must be ensured (see "Installation -
Ventilation" and "Installation dimen-
sions").
To install the wine conditioning unit,
you will need the following tools:
– A selection of screwdrivers
– a spirit level
– a tape measure
The following installation parts are
required:
– Ventilation grilles
– Air filter
– Foam block for air filtration in the
appliance plinth
– Screws to secure the appliance in
the niche
– Wrench to adjust height in the
niche