Operating/Installation Instructions

Frequently asked questions
53
General problems with the wine conditioning unit
Problem Possible cause and solution
There is no acoustic
alarm although the door
has been open for a
long time.
This is not a fault. The alarm tone has been turned off
in settings mode (see "Selecting additional settings -
Acoustic signals").
The wine conditioning
unit cannot be switched
off.
The safety lock is activated. The symbol is lit in the
display.
 Turn off the safety lock (see "Selecting settings -
Switching the safety lock on/off").
The slats on the
wooden shelves are
warping.
Volume change due to moisture absorption or drying
out is a typical characteristic of wood. An increase in
humidity will cause wooden components to warp,
which can lead to cracking. Knots and wavy grain are
characteristic for wood and cannot be avoided.
Mildew has begun to
form on the wine bottle
labels.
Mildew may form on the labels, depending on the
type of label adhesive used.
 Clean the wine bottles and remove any adhesive
residue.
A white deposit has
formed on the wine bot-
tle corks.
The corks have oxidized due to contact with the air.
 Use a dry cloth to wipe off the deposit. The de-
posit will not affect the quality of the wine.