Operating/Installation Instructions

Installation information
61
Ventilation
The appliance is ventilated via the venti-
lation gap in the plinth. This must not
be covered over or blocked. Clean the
ventilation gap regularly to remove any
dust.
The cut-out in the unit base must be in
the center of the wine conditioning
unit.
Before installing the wine con-
ditioning unit
 Remove the accessories from the ap-
pliance.
 Remove the cord clip from the back
of the appliance (depending on
model).
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.