Owners Manual

Table Of Contents
Display brightness s
You can adjust the brightness of the
display to suit the light conditions in the
room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Changing the brightness of the
display
^ Touch the settings button.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the buttons for setting the
temperature (X or Y) repeatedly until
the ) symbol flashes in the display.
^
Touch the OK button to confirm your
selection.
The last selected setting flashes in the
display and the s lights up.
^
By touching the X or Y button, you
can now alter the brightness of the
display:
1: dimmest setting
2: medium setting
3: brightest setting.
^
Touch the OK button to confirm your
selection.
The selected setting will be adopted
and the s symbol will flash.
^ Touch the settings button to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after
approximately one minute.
Selecting additional settings
20