Owners Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the appliance 10
- Accessories 13
- Emergency door opener 14
- How to save energy 15
- Turning the appliance on and off 16
- Selecting additional settings 18
- Temperature and air quality 21
- Temperature and door alarm 26
- Feature lighting 28
- Storing wine bottles 30
- Sommelier set 35
- Automatic defrosting 37
- Cleaning and Care 38
- Active charcoal filter 41
- Frequently asked questions 43
- Noises 48
- After sales service 49
- Information for dealers 50
- Caring for the environment 53
- Electrical connection 54
- Installation 56
- Adjusting the door hinge 61
- Under-counter installation 65
- Contact details 76
The temperature being set will flash in
the display.
The following information shows in the
display when the buttons are tapped:
–
When first touched:
The last temperature selected
flashes.
–
Each subsequent touch of the
button:
The temperature value adjusts in 1°
steps.
–
Keeping your finger on the button:
The temperature changes
continuously.
Approximately 5 seconds after the last
time a sensor button has been touched,
the current temperature inside the
appliance is automatically shown.
When the temperature is altered, there
is a short delay until the temperature
selected is set.
The temperature display on the
control panel always shows the
actual temperature.
Possible setting values for the
temperature
The temperature can be set between
41°F and 68°F (5°C and 20°C).
Temperature display
In normal operation the temperature
display shows the actual temperature in
the appliance.
If the temperature in one of the zones is
not within the range that the appliance
is able to display, dashes will light up in
the temperature display.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature in the display.
Temperature and air quality
23