Owners Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the appliance 10
- Accessories 13
- Emergency door opener 14
- How to save energy 15
- Turning the appliance on and off 16
- Selecting additional settings 18
- Temperature and air quality 21
- Temperature and door alarm 26
- Feature lighting 28
- Storing wine bottles 30
- Sommelier set 35
- Automatic defrosting 37
- Cleaning and Care 38
- Active charcoal filter 41
- Frequently asked questions 43
- Noises 48
- After sales service 49
- Information for dealers 50
- Caring for the environment 53
- Electrical connection 54
- Installation 56
- Adjusting the door hinge 61
- Under-counter installation 65
- Contact details 76
To avoid tipping over, the appliance
must be properly installed and
secured.
WARNING!
Danger of tilting! To avoid a hazard
due to instability of the appliance, it
must be secured in accordance with
the instructions.
Side-by-side installation
To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not generally be
installed directly next to other such
appliances.
However, this wine storage unit can be
installed side-by-side with certain
models.
Please contact Miele for specific
information about which
combinations will work with your
appliance.
Location
This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a
radiator. The room temperature should
not go above or below the climate
range for which the appliance is
designed. The higher the ambient
temperature of the room, the more
energy the appliance requires to
operate.
The appliance should be installed in a
dry, well-ventilated room.
The following should also be taken into
consideration:
– The plug must be easily accessible
and not concealed behind the
appliance so that the appliance can
quickly be disconnected from the
electricity supply in an emergency. In
addition, no other appliances should
be plugged into a socket located
directly behind this appliance.
–
The power cord must not come into
contact with the back of the
appliance, as they could be
damaged by vibrations from the
appliance. This may result in a short
circuit.
Installation
57