Operating and Installation Instructions Wine Conditioning Unit To prevent accidents and machine damage, read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5 Caring for the environment ................................................................................ 12 Saving energy ...................................................................................................... 13 Guide to the appliance ........................................................................................ 14 Control panel ..............................................
Contents Storing wine bottles ............................................................................................ Wooden shelves .................................................................................................... Moving the wooden shelves............................................................................. Adjusting the wooden shelves ......................................................................... Labeling the wooden racks .........................................
Contents Custom door panel................................................................................................ Horizontal and vertical gaps............................................................................. Weight of the custom door panel ..................................................................... Installation dimensions..................................................................................... Custom door panel dimensions ...........................................
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use to prevent accidents and machine damage. This wine conditioning unit complies with all current local and national safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating and installation instructions carefully before using the wine conditioning unit.
IMPORTANT SAFETY INSTRUCTIONS Use This wine conditioning unit is intended for use in domestic households and similar residential environments such as – staff kitchen areas in shops, offices and other working environments – farm houses and by clients in hotels, motels and other residential type environments – bed and breakfast type environments – catering and similar non-retail applications. This wine conditioning is not intended for use outdoors, in damp environments or in places exposed to rain.
IMPORTANT SAFETY INSTRUCTIONS Technical safety The refrigerant circuit has been checked for leaks. The wine conditioning unit complies with statutory safety requirements and the appropriate EU directives. This wine conditioning unit contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. The coolant does not damage the ozone layer and does not contribute to the greenhouse effect.
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the wine conditioning unit, make sure that the connection data (fuse rating, frequency and voltage) on the data plate corresponds to the household supply. Check that this is the case before connecting the wine conditioning unit. Consult a qualified electrician if in any doubt. The electrical safety of the wine conditioning unit can only be guaranteed when correctly grounded. It is essential that this standard safety requirement is met.
IMPORTANT SAFETY INSTRUCTIONS – the circuit breaker has been tripped, or – the power cord has been unplugged. Pull on the plug and not on the cord when removing it from the outlet. Installation, repair, and maintenance work should only be performed by a Miele-authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Repairs and other work performed by unauthorized persons could be dangerous and may void the warranty.
IMPORTANT SAFETY INSTRUCTIONS Risk of explosion. Do not operate any electrical appliances inside the wine conditioning unit. Risk of sparking and explosion. Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become invalid. Cleaning and care Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Do not use a steam cleaning appliance to clean this wine conditioning unit.
IMPORTANT SAFETY INSTRUCTIONS Transport Always transport the wine conditioning unit in an upright position and in its original transport packaging to avoid damage in transit. Risk of injury and damage. The wine conditioning unit is very heavy and must be transported by two people. Disposing of your old appliance If your old wine conditioning unit or refrigerator has a door lock, destroy it. This will prevent the risk of children playing accidentally locking themselves in and endangering their lives.
Caring for the environment Disposal of packaging material The packaging is designed to protect the wine conditioning unit from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Return the packaging to your dealer.
Saving energy Normal energy consumption Increased energy consumption In a well-ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, range/oven). Near a heat source (radiator, oven). Where the ideal room temperature is approx. 68°F (20°C). Where the ambient room temperature is above 77°F (25°C). Ventilation gaps unobstructed and dusted regularly. Where the ventilation gaps are blocked and full of dust.
Guide to the appliance Control panel a On/Off of the entire appliance b Optical interface (for Miele Technical Service only) c For selecting the upper or lower wine conditioning zone d For switching the DynaCool function (constant humidity) on and off e For switching the feature lighting on and off f For setting the temperature ( for colder) g For confirming your selection (OK sensor) h For setting the temperature ( for warmer) i For selecting and deselecting settings mode j For switching the temperature
Guide to the appliance Explanation of symbols Symbol Meaning Function Safety lock To prevent inadvertent switching off and altering of settings °C For selecting the temperature unit °F Celsius (°C) or Fahrenheit (°F) Acoustic signals Choice of sensor tone and door alarm tone Miele@home (if available) Only visible when the Miele@home communication module or communication stick is used (see “Miele@home”) Demo mode (only visible when Demo mode is active) For turning off Demo mode
Guide to the appliance e Control panel for the upper and lower wine conditioning zones/ isolation plate for thermal separation of the zones f Active AirClean filter g Isolation strips for thermal separation of the conditioning zones h Safety glass door with UV filter i 3D bottle presenter * The SommelierSet consists of: A glass holder, a bottle holder, and 4 covers for the runners.
Accessories Accessories supplied Optional accessories Chalk A range of useful Miele accessories and care products are available for your wine conditioning unit. Use the chalk supplied to write on the magnetic strips on the wooden shelves for easy identification of the wines in storage. Active AirClean filter The Active AirClean filter ensures optimum air exchange and therefore excellent air quality in the wine conditioning unit.
Switching the wine conditioning unit on and off Before first use Packaging material Remove all packaging material from the inside of the appliance. Cleaning Please refer to the relevant instructions in “Cleaning and care”. Clean the inside of the wine conditioning unit and the accessories. Operating the wine conditioning unit A light touch of the finger on the sensors is all that is required to operate this wine conditioning unit. Every touch of a sensor is confirmed with an audible keypad tone.
Switching the wine conditioning unit on and off The interior lighting will come on when the appliance door is opened. Switching the wine conditioning unit off Selecting settings A different setting can be set for each wine conditioning zone. To do this, touch the sensor for the wine conditioning zone for which you want to adjust the settings. The sensor that has been selected is highlighted in yellow.
Switching the wine conditioning unit on and off Switching off for longer periods of time If the wine conditioning unit is not going to be used for a longer period of time: Switch the wine conditioning unit off. Unplug the appliance or switch off the breaker. Clean the wine conditioning unit. Leave the door to the wine conditioning unit ajar to enable air to circulate and to avoid odors building up inside it.
Selecting additional settings Certain settings on the wine conditioning unit can only be selected in settings mode. The door alarm is automatically disabled when the appliance is in settings mode. Safety lock By touching the or sensor, you can now select whether the safety lock is activated or deactivated: 0: the safety lock is deactivated 1 : the safety lock is activated.
Selecting additional settings Temperature unit (Celsius or Fahrenheit) The temperature can be displayed in either Fahrenheit °F or Celsius °C. Degrees Fahrenheit °F is the factory setting. You can now select °C by touching the or sensors. Setting the temperature display to Celsius Touch the OK sensor to confirm the selection. The selected setting is saved. Touch the settings sensor. All symbols available for selection will appear on the display and the symbol will flash.
Selecting additional settings Setting the temperature display to Fahrenheit Touch the settings sensor. All symbols available for selection will appear on the display and the symbol will flash. Touch the settings sensor to exit settings mode. If you do not do this, the appliance electronics will exit settings mode automatically after approximately 1 minute. The temperature will now be displayed in Fahrenheit.
Selecting additional settings Acoustic signals The wine conditioning unit has audible tones such as the sensor tone and the door and temperature alarms. You can turn the sensor tone or the acoustic door alarm on or off, but you cannot turn off the temperature alarm. There are four settings to choose from. Option 3 is set at the factory, this means that the sensor tone and the door alarm are turned on.
Selecting additional settings Display brightness You can adjust the brightness of the display to suit the ambient light conditions in the room. The display brightness can be adjusted incrementally from 1 to 3. The factory default setting is 3 (maximum brightness). Changing the brightness of the display Touch the settings sensor. All symbols available for selection will appear in the display and the symbol flashes.
Selecting additional settings Sabbath mode Turning on Sabbath mode The Sabbath mode supports the observance of religious customs. The following are turned off: – the interior lighting when the door is opened, – all acoustic and optical signals – the temperature display, Touch the Settings sensor. All symbols available for selection will appear in the display and the symbol flashes.
Selecting additional settings As soon as the symbol goes out in the display after 3 seconds, Sabbath mode is switched on. Turn off Sabbath mode after the Sabbath has passed. Turning off Sabbath mode Touch the Settings sensor to leave Sabbath mode. The temperature will appear in the display and the interior lighting will come on.
Optimum temperature and air quality Wine continues to mature depending on the surrounding conditions. The length of time for which wine can be kept in good condition will therefore depend not only on the temperature but also on the air quality. Fluctuations in temperature put wine under stress and interrupt the maturing process. It is therefore very important to maintain a constant temperature.
Optimum temperature and air quality Safety device in case of low ambient temperatures The appliance is equipped with a safety thermostat to protect your wine against a sharp drop in temperature. If the external temperature should drop below this level, a heater element turns on automatically to keep the temperature inside as constant as possible. If the ambient temperature continues to fall, the appliance switches itself off automatically.
Optimum temperature and air quality When you touch the sensors, you will see the following changes in the display: – With the first touch: The last temperature set flashes. – Each subsequent touch: The temperature changes in 1° increments. – Keeping your finger on the sensor: The temperature changes continuously. A negative tone will sound (if the sensor tone is switched on) when the lowest or highest possible temperature is reached.
Optimum temperature and air quality Air quality and humidity In most refrigerators, the humidity is too low for wine and therefore a refrigerator is not suitable for wine storage. High humidity levels are necessary when storing wine to moisturize corks from the outside. When the humidity is too low the corks dry out and the bottle is no longer tightly sealed. For this reason wine bottles should always be stored horizontally to ensure that corks are also moisturized from the inside.
Optimum temperature and air quality Switching off DynaCool The wine conditioning unit uses slightly more energy and is a little noisier when the DynaCool function is switched on. You can switch it off now and then if you wish. Touch the On/Off sensor of the DynaCool function so that it is no longer highlighted in yellow. Air filtration with the Active AirClean filter The Active AirClean filter achieves optimum air quality by filtering the incoming air.
Temperature and door alarm The appliance is equipped with an alarm system so that the temperature cannot rise or fall unnoticed, which could possibly damage the wine. Switching the temperature alarm off early If the acoustic alarm disturbs you, it can be switched off. Temperature alarm If the temperature in one of the wine conditioning zones rises or falls by a certain amount, the sensor for that zone will flash in the control panel and at the same time the alarm symbol will flash in the display.
Temperature and door alarm Door alarm An alarm will sound if the appliance door has been left open for longer than approx. 2 minutes. The sensors for the two wine conditioning zones will flash in the control panel. The alarm symbol lights up on the display. As soon as the appliance door is closed, the alarm will stop. The sensors for the two wine conditioning zones and the alarm symbol will go out in the control panel.
Feature lighting The interior lighting can be set to remain on when the door is closed so your wines can be on display at all times. Setting the brightness of the feature lighting The brightness of the feature lighting can be adjusted. Each wine conditioning zone has its own lighting strip so all zones are illuminated. Switching the feature lighting on and off Touch the On/Off sensor for the feature lighting so that it is highlighted in yellow.
Feature lighting Lighting duration of the feature lighting Touch the OK sensor to confirm your choice. The set brightness is saved to memory. The temperature display then appears again. As soon as the appliance door is closed, the set brightness for the feature lighting takes effect. When the appliance door is opened, the interior lighting returns to its normal level. The lighting duration for the feature lighting is set to 30 minutes at the factory.
Feature lighting By touching the sensors – the lighting duration is reduced by 30 minutes – the lighting duration is increased by 30 minutes. Touch the OK sensor to confirm your choice. The selected lighting duration is saved. The temperature reappears in the display. The set lighting duration starts again whenever the appliance door is opened and closed. Thanks to the use of LED lighting, the wine will not be adversely affected by heat or UV light. Risk of injury from LED lighting.
Storing wine bottles Vibration and movement have a negative effect on the maturing process which can in turn affect the taste of the wine. To avoid disturbing other bottles when removing a bottle of wine, store bottles of the same type beside each other on the same shelf. Avoid stacking bottles on top of one another on the wooden shelves. Always place the bottles in a horizontal position so that the natural corks can be kept moist on the inside and air is prevented from getting into the bottles.
Storing wine bottles Wooden shelves Moving the wooden shelves The wooden shelves can be removed and replaced again if required. The wooden shelves are mounted on telescopic runners which can be pulled out to make it easier to store and remove bottles. Pull the wooden shelf out until it stops . Release the wooden shelf at the back, lifting the shelf on the left and right at the same time . Lift the wooden shelf forwards to remove it.
Storing wine bottles Adjusting the wooden shelves The slats in the wooden shelves can be individually adjusted to suit, so that every bottle is stored in perfect safety regardless of shape or size. To replace the wooden shelf, position it on the extended runners. The notches in the wooden shelf fit over the retaining pins. The magnetic strip should be pointing forwards. Simply lift individual slats to move or remove them from the wooden shelves.
Storing wine bottles Labeling the wooden racks Setting up the 3D bottle presenter For quick and easy identification of the wines stored, you can write on the blackboard-painted surface on the magnetic strips on the wooden shelves. Set up the 3D bottle presenter in the bottom of the wine conditioning unit: Use the chalk supplied. You can write directly on the magnetic strip or remove it from the wooden shelf. To do so: Hold the magnetic strip by the sides and pull it forwards.
Storing wine bottles Maximum capacity Risk of damage. If you do not wish to use the 3D bottle presenter for presentation purposes, simply fold down the rear legs. Place the 3D bottle presenter flat on the floor of the wine conditioning unit and push it back carefully until it touches the back wall of the appliance. Important! The 3D bottle presenter can only take bottles up to a maximum bottle height of 10 5/8" (270 mm) (e.g., Piccolo bottles) when laid flat in the wine conditioning unit.
Storing wine bottles Without SommelierSet – Without 3D bottle presenter – With 3D bottle presenter set up With the 3D bottle presenter removed, up to 80 Bordeaux-type bottles (0.75 l) can be stored in the wine conditioning unit, with 33 bottles in the upper zone and 47 bottles in the lower zone. The maximum capacity of 80 bottles can only be reached if the 3D bottle presenter is removed. With the 3D bottle presenter set up, up to 70 Bordeaux-type bottles (0.
Storing wine bottles With SommelierSet – Without 3D bottle presenter Up to 62 Bordeaux-type bottles (0.75 l) can be stored in the wine conditioning unit, with 15 bottles in the upper zone and 47 bottles in the lower zone. 44 – With 3D bottle presenter set up With the 3D bottle presenter set up, up to 52 Bordeaux-type bottles (0.75 l) can be stored in the wine conditioning unit, with 15 bottles in the upper zone and 37 bottles in the lower zone.
SommelierSet Setting up the SommelierSet Fitting the runner covers Remove both wooden shelves above the SommelierSet by pulling them out as far as they will go and lifting them off the rails. To do this, hold them by the frame. The SommelierSet can be used to have your wine ready for drinking. You can store wine glasses and accessories, decant your wine, and store open bottles in the wine conditioning unit. Place the four covers supplied over the runners which are now visible.
SommelierSet Inserting the glass holder Inserting the bottle holder This can be used for storing and chilling wine glasses. You can store opened wine bottles in the bottle holder . To fit the glass holder , remove the necessary number of slats from the wooden shelf. Place the glass holder on the wooden shelf. Tip: There are two compartments underneath the glass rail for accessories such as corkscrews, knives, and chalk.
Automatic defrosting The wine conditioning unit defrosts automatically.
Cleaning and care WARNING! DANGER of electric Cleaning agents shock! Unplug the appliance or trip the circuit breaker. To avoid damaging the surfaces of your appliance, do not use: WARNING! Fire hazard! – cleaning agents containing soda, ammonia, acids, or chloride Do not damage the coolant pipework. – cleaning agents containing lime scale remover Do not let water get into the electronic unit or the lighting.
Cleaning and care Before cleaning the wine conditioning unit Switch off the appliance. Unplug the appliance or trip the circuit breaker. Take any wine bottles out of the wine conditioning unit and store them in a cool place. Take out all other removable parts for cleaning. Remove the magnetic strips from the wooden shelves before cleaning them (see “Labeling wooden shelves”). Interior, accessories, and appliance door Clean the wine conditioning unit regularly, or at least once a month.
Cleaning and care Cleaning the ventilation grilles A build-up of dust will increase the energy consumption of the appliance. The air vents should be cleaned on a regular basis with a brush or vacuum cleaner (you could use a Miele vacuum cleaner dusting brush, for example). Cleaning the door seal Risk of damage as a result of incorrect cleaning. If you treat the door seal with oils or grease, it can become porous. Do not use any oils or grease on the door seal.
Active AirClean filter Fresh air from the room enters the wine conditioning unit through the Active AirClean filter. Filtering the incoming air through the Active AirClean filter ensures that all air entering the appliance is fresh and free from dust and odors. The reminder to change the Active AirClean filter will be displayed at the latest every 12 months. Insert the new filter. When the Change Active AirClean filter symbol lights up in the display, the Active AirClean filter must be changed.
Active AirClean filter Touch the sensors for setting the temperature ( or ) repeatedly until the symbol flashes in the display. Touch the settings sensor to leave the settings mode. Otherwise the appliance will exit the settings mode automatically after approximately one minute. The in the display goes out. Touch the OK sensor to confirm your selection. The symbol flashes in the display (meaning: Active AirClean filter is installed in your wine conditioning unit), the symbol lights up.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently Asked Questions Problem Possible cause and solution The compressor is switching on more frequently and for longer periods of time, the temperature in the wine conditioning unit is falling. The temperature in the wine conditioning unit is set too low. Correct the temperature setting. The appliance door is not properly closed. Check whether the appliance door is properly closed. The appliance door was opened too frequently.
Frequently Asked Questions Messages in the display Message Possible cause and solution The alarm symbol is lit up in the display and both wine conditioning zone sensors flash in the control panel. An audible alarm is also sounding. The door alarm has been activated. Close the wine unit door. Both wine conditioning zone sensors and the alarm symbol will go out and the acoustic alarm will stop.
Frequently Asked Questions The interior lighting is not working. Problem Possible cause and solution The LED interior lighting The wine conditioning unit is not switched on. is not working. Switch the wine conditioning unit on. To avoid overheating, the LED lighting switches itself off automatically after approx. 15 minutes if the appliance door is left open. If this is not the cause, then there is a fault. Risk of electric shock. There are live electrical components under the lighting cover.
Frequently Asked Questions General problems with the wine conditioning unit Problem Possible cause and solution The door seal is damaged or needs to be replaced. No tools are required to change the door seal. Change the door seal. A replacement is available from Technical Service. An alarm does not sound even though the appliance door has been open for a long time. This is not a fault.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub.... A gurgling noise can be heard when the coolant circulates through the pipes. Click.... Clicking sounds occur whenever the thermostat switches the motor on or off. Sssrrrrr.... On multi-zone wine conditioning units you can sometimes just hear the sound of the fan inside the appliance. Crack...
Technical Service Contact in case of fault Warranty In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Technical Service. For more information about warranty conditions, please contact Miele Technical Service. Contact information for Miele Technical Service can be found at the end of this document. Please quote the model and serial number of your appliance when contacting Miele. Both pieces of information can be found on the data plate.
*INSTALLATION* Installation Installation location Risk of injury and damage. A wine conditioning unit that has not been installed properly can tip up. Keep the appliance door shut until the wine conditioning unit has been built in and secured in its building-in niche in accordance with these operating and installation instructions. Fire hazard and risk of damage. This wine conditioning unit must not be installed underneath a cooktop. Fire hazard and risk of damage.
*INSTALLATION* Installation Load-bearing capacity of the niche floor To ensure the safe installation of the wine conditioning unit and to guarantee its correct functioning, the floor of the niche where the appliance is to be installed must be smooth and even. It must be made from strong, rigid material. Because the appliance is extremely heavy when fully loaded, it is essential that the floor it stands on is able to bear its weight. When fully loaded, the weight of the wine conditioning unit is approx.
*INSTALLATION* Installation Climate class Side-by-side The wine conditioning unit is designed for use within a certain climate range (ambient temperatures) and should not be used outside this range. The climate range of the wine conditioning unit is stated on the data plate inside it. This wine conditioning unit can be installed side-by-side with another wine conditioning unit or refrigerator.
*INSTALLATION* Installation Ventilation WARNING! Fire hazard! Operation of the wine conditioning unit is limited. Keep the ventilation slits free from obstruction. The air at the back wall of the wine conditioning warms up. Therefore the cabinet must be constructed in such a way that ensures unhindered ventilation (see “Built-in dimensions”). If the ventilation slits are not kept free and unobstructed the compressor will switch on more often and will run for longer.
*INSTALLATION* Installation If you wish to fit a grille in the ventilation openings, the ventilation openings must be larger than 31 square inches. The passage volume of 31 square inches is the total area of the opening slits in the grille. – Important! The larger the ventilation slits, the more economically the wine conditioning will work. The ventilation slits must not be blocked or obstructed in any way. Clean the ventilation slits on a regular basis.
*INSTALLATION* Installation Gap X for different edge radii B R0 ≥ 5/8" -3/4" (16-19 mm) R1.2 R2 1 5/8" 1/16" (2 mm) (42 mm) Custom door panel thickness A R3 min. 1/8" (3 mm) Adjoining side wall 3/4" (20 mm) 3/16" 3/16" 3/16" (5 (4 (4 mm) mm) mm) 1/8" (3.5 mm) 3/4" (20 mm) 3/16" 3/16" 3/16" 3/16" (5.5 (5 (4.5 (4 mm) mm) mm) mm) 7/8" (22 mm) 1/4" (6.5 mm) 1 5/8" 1/16" (2 mm) (42 mm) 1/4" 3/16" 3/16" (6 (5.
*INSTALLATION* Installation Installation dimensions ≥ 31"2 ≥1 9/1 6" ≥ 19 6" 11/1 ≤ 60 3/8" ≥2 1 22 1 5/8" /16" * 6" /1 11 19 ≥ " 22 1/16 9/1 6" 69 3/4" + 5/8 ≤ 82 11/16" ≥1 ≤ 15 1/2" ≥ 31"2 ≥ 440 lb The power cord is 110 1/4" (2,800 mm) long. The electrical socket must be easily accessible in an emergency and not concealed behind the appliance. 66 ≤ 7/8" The power cord is 110 1/4" (2,800 mm) long.
*INSTALLATION* Installation Custom door panel dimensions Reversing the door hinge The wine conditioning unit is supplied right-hinged. If left-hand hinging is required, the hinges must be changed. 4 5/8" (117.2 mm) 60 3/8" (1533 mm) 15 1/2" (393 mm) Risk of damage. Never fit a custom door panel in front of the glass door as this can lead to a build up of moisture and cause corrosion of the wine conditioning unit.
*INSTALLATION* Installation Risk of injury. If the hinges close, there is a risk of injury. Leave the hinges open. Open the appliance door and remove covers and on the left and right of the wine conditioning unit. Remove cover from the bottom of the appliance. Unscrew the transport safety device . Tip: Keep this device in a safe place for refitting should the appliance need to be moved in the future. Risk of injury and damage.
*INSTALLATION* Installation 6 Take off the upper retaining bracket and replace it on the opposite side. Remove the stopper from the appliance door. Remove the spacer from the appliance door, rotate it 180° and fit it on the opposite side. Refit the stopper on the opposite side of the door.
*INSTALLATION* Installation Unscrew the hinges and covers from the appliance door. Fit the hinges and covers diagonally on the opposite side. Risk of injury. The second person must support the appliance door during the following steps.
*INSTALLATION* Installation Replace bottom cover and click it into place. Check that the wine conditioning unit is standing securely in the building-in niche and that the appliance door closes properly. Before installing the wine conditioning unit Fit the screws through the hinges at the top and bottom. Take any accessories out of the appliance. Tighten the bottom screws followed by the top screws. Replace top covers and and click them into place.
*INSTALLATION* Installation The door hinges on the wine conditioning unit are set at the factory to enable the appliance door to be opened wide. However, if the opening angle of the appliance door needs to be limited for any reason, the hinge can be adjusted to accommodate this. If, for example, the appliance door hits an adjacent wall when it is opened, you should limit the opening angle of the appliance door to 90°.
*INSTALLATION* Installation All fitting instructions given are for a right-hand hinged appliance. If you have converted the appliance to lefthand hinging, you will need to adapt these instructions accordingly. Preparing the wine conditioning unit Unscrew the transport safety devices from both sides on the back of the wine conditioning unit and remove them upwards. Feed the power cord through to the electrical socket. Risk of fire due to short circuit.
*INSTALLATION* Installation Slide the filler panel supplied from the front into the holders on the wine conditioning unit as shown. Push the wine conditioning unit two thirds of the way into the building-in niche. If the wine conditioning unit is lefthinged, allow for the position of the lug (see illustration above). Turn the front adjustable feet all the way in using the wrench supplied.
*INSTALLATION* Installation Unscrew the transport safety device from the front of the wine conditioning unit, if you have not already done so. Tip: Keep this device in a safe place for refitting should the appliance need to be moved in the future. With 5/8" (16 mm) thick housing unit walls only: Remove the top cover . 5 6 Screw the supplied fixing bracket loosely with the screws supplied into the top left of the wine conditioning unit (1st and 3rd hole from the left).
*INSTALLATION* Installation Fit the stopper supplied onto the fixing bracket also supplied. Screw the supplied fixing bracket loosely with the screws supplied into the bottom of the appliance. Do not tighten the screws so that you can adjust the position of this part. Push the wine conditioning unit two thirds of the way into the building-in niche. Carefully remove the protective foil from the supplied sealing strip .
*INSTALLATION* Installation Installing the wine conditioning unit If the wine conditioning unit is pushed too far into the building-in niche, the appliance door will not close properly. This can cause ice to build up and condensate to accumulate, and cause the appliance to malfunction. These issues can all lead to increased energy consumption.
*INSTALLATION* Installation 1. Push the fixing brackets and against the housing unit wall. 4. 2. Push the hinged side of the appliance to the housing unit wall. To secure the wine conditioning unit to the housing unit, screw the supplied particle board screws through the hinge plates at the top and bottom (1. + 2.). 3.
*INSTALLATION* Installation board screws and through the hinge plates at the top and bottom (3. + 4.). For additional stability of the wine conditioning unit in the housing unit, push the stabilizing rods supplied in underneath the appliance between it and the floor of the housing unit: Now tighten screws and . 18 17 18 17 Snap off any protruding ends from securing brackets and . They are no longer required and can be disposed of in the household garbage.
*INSTALLATION* Installation Check that the wine conditioning unit is standing securely in the building-in niche and that the appliance door closes properly. Installing the custom door panel If installed in a run of units, make sure that the top edge of the custom door panel is at the same height as adjoining unit doors. The door panel must be installed level, and not under tension. Please use the screws for the custom door panel as well as the gap cover included in the accessories supplied.
*INSTALLATION* Installation Unscrew the nuts and remove the mounting frame from the appliance door. X Y Open the appliance door and hang the custom door panel from its mounting frame onto the threaded bolts from above. Position the mounting frame on the custom door panel according to the markings and screw it tightly using the two screws supplied.
*INSTALLATION* max. 1/8" (2.5 mm) Installation Screw the nuts loosely onto the threaded bolts . Do not tighten the nuts yet. Close the appliance door carefully and check the distance between the door and adjoining unit doors. The distance should be the same. Align the sides of the appliance door X and the height Y using the threaded bolts.
*INSTALLATION* Installation Close the appliance door again and check the distance between the door and adjoining unit doors. Now screw on the top nuts . The appliance door is now secured. Secure the custom door panel to the appliance door at the bottom using the screws supplied. Resecure the custom door panel at the top using the screws supplied.
*INSTALLATION* Installation The following confirms that the appliance is correctly installed: – The appliance door closes properly. – The door does not touch the cabinet. – The seal on the top corner of the handle side is firmly seated. To double check place a torch in the appliance and close the door. Turn the lights out in the room. If you can see any light shining out from the sides double check the installation. Replace the covers at the top and bottom on the appliance door.
*INSTALLATION* Installation Electrical connection Danger of electric shock! The wine conditioning unit must only be switched on when it has been installed in accordance with the installation instructions. Ground the wine conditioning unit. The wine conditioning must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit.
*INSTALLATION* Installation The outlet must be easily accessible in an emergency so that the wine conditioning unit can be quickly disconnected from the electrical supply in case of an emergency. If the outlet is no longer accessible once the appliance has been installed, an all-pole disconnect device with a contact opening of at least 1/8" (3 mm) must be present on site. The disconnect device may be circuit breaker, a fuse, or a contactor (compliant with local regulations).
Information for dealers Demo mode The appliance can be demonstrated in the showroom or at exhibitions in “Demo mode”. In this mode the control panel and interior lighting are active but the compressor remains turned off, so that the appliance does not cool down. Turning on Demo mode Keep your finger on the sensor until the symbol appears in the display. Then release the sensor. Demo mode is turned on and the symbol is illuminated in the display.
Information for dealers Touch the or sensor so that the symbol 0 appears in the display (meaning: Demo mode is inactive). Touch the OK sensor to confirm your selection. The selected setting will be adopted and the symbol will flash. Touch the settings sensor to leave the settings mode. Otherwise the appliance will exit the settings mode automatically after approximately one minute. Demo mode is turned off and the symbol disappears.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
KWT 6722 iS en-US M.-Nr.
