Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Switching the wine conditioning unit on and off
- Selecting additional settings
- Optimum temperature and air quality
- Temperature and door alarm
- Feature lighting
- Storing wine bottles
- SommelierSet
- Automatic defrosting
- Cleaning and care
- Active AirClean filter
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Installation
- Information for dealers
Feature lighting
35
The interior lighting can be set to re-
main on when the door is closed so
your wines can be on display at all
times.
Each wine conditioning zone has its
own lighting strip so all zones are illumi-
nated.
Switching the feature lighting
on and
off
Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.
The interior lighting is now switched on,
even when the appliance door is
closed.
To switch the feature lighting off
again:
Touch the On/Off sensor for the fea-
ture lighting so that it is no longer
highlighted in yellow.
The interior lighting is now switched off
when the appliance door is closed.
Setting the brightness of the feature
lighting
The brightness of the feature lighting
can be adjusted.
Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.
Touch the sensor for the feature light-
ing again for approximately 4sec-
onds until flashes in the display (af-
ter 2seconds, will flash).
Use the sensors for altering the tem-
perature to set the feature lighting
brightness(and). To do this,
touch and hold the sensors. The
brightness is adjusted directly and is
infinitely variable. The results are not
visible in the display.
By touching the sensor:
– The lighting becomes dimmer.
– The lighting becomes brighter.