Operating instructions/Installation instructions

Saving your favourite programme (Memory)
47
You have the option of saving one fa-
vourite programme to memory. This pro-
gramme can be used for your most fre-
quently cooked recipe. The programme
can have up to 3stages (e.g.: 1minute
at 600W, followed by 2minutes grill and
finally 3minutes at 150W with grill).
Programming
(The example given is for a three-stage
programme)
 First select the function for the first
stage.
 Then select the duration.
 Press the M button.
1 will light up in the display, and 2 will
flash.
 Then select the second function and
duration.
 Press the M button again.
2 will light up and 3 will flash.
 Now select the third function and
duration and then touch OK. Press
the M button.
After this third step, you can use the
Mbutton to scroll through your entry
and check it.
 When you have finished program-
ming, turn the power selector to the
12o’clock position.
 Start the programme to save the
entry. Only ever run the entire pro-
gramme with food in the appliance.
 Damage due to operation
without food.
The microwave oven can be dam-
aged if it is used without food being
placed in it.
If there is no food in the appliance,
press the Stop/C button twice as
soon as you have started the pro-
gramme.
1- and 2-stage programmes can be
saved in the same way. The program-
ming process is finished when the
power selector is in the 12 o’clock posi-
tion and the Start button has been
pressed, while pressing the Mbutton
shows the next stage.
To change an entry
 Entering a new programme overrides
the previously saved programme.
To access your favourite pro-
gramme
 Turn the programme selector to the
12o'clock position.
 Press the M button.
 Press the Start button.
In the event of a power cut, the fa-
vourite programme is no longer
saved and must be re-entered.