User manual

Problem solving guide
64
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
A programme
will not start.
Check whether:
 the appliance door is closed.
 the system lock has been activated (see “System lock” sec-
tion in the “Operation” chapter).
 “door” has appeared in the display. The door has not been
opened for a long time (approx. 20minutes) (see “door mes-
sage” section in the “Operation” chapter).
 the appliance is plugged into the electricity supply and
switched on at the socket.
 the mains fuse has tripped. If it has, there could be a fault with
the appliance, the household electricity supply or another appli-
ance (disconnect the appliance from the electricity supply and
contact a qualified electrician or the Miele Customer Service
Department, see “Customer service” chapter).
A noise can
be heard after
a cooking
programme.
This is not a fault. The cooling fan will continue to run for a while
after the oven has been switched off to prevent any humidity
building up in the oven compartment, on the control panel or on
the oven housing unit. It will switch off automatically.
The display
does not light
up.
The time of day display has been switched off.
 Press and hold the button for several seconds.
Night time switch-off is activated.
 Deactivate it.
The turntable
does not turn
smoothly.
The area underneath the turntable could be dirty.
 Check whether there is any soiling underneath the turntable.
 Check whether the surfaces between the turntable and the
roller ring are clean.
 Clean the area underneath the turntable.