User manual
61
DFG 200 Ventilation grille
For all extraction mode rangehoods
Stainless steel ventilation grille for installation in an
external wall. Extraction connection: 200 mm Ø.
Dimensions: 310 x 310 x 80 mm (H x W x D)
Reducing collar
For all extraction mode rangehoods, to reduce the
size of the extraction connection. Please note, this
may increase the operating sound and reduce the
airthrough put performance of the rangehood.
from 200 to 150 mm Ø
from 150 to 125 mm Ø
DKS Condensate trap
For all extraction mode rangehoods with a built-in fan
For trapping condensate, e.g. for ducting systems that
pass through several storeys and where there is a
dierence in temperature (recommended for
temperate to cold climate installations).
DKS 125 for 125 mm Ø
DKS 150 for 150 mm Ø
DAMK 100-150 Wall vent kit
DAS Flexible aluminium ducting
1.25 m long, extends to 5 m, recommended for all
rangehoods, in preference of highly exible
concertina type ducting.
DAS 125 for 125 mm Ø (under space constrictions)
DAS 150 for 150 mm Ø (recommended for most)
DAS 200 for 200 mm Ø (high-performance models)
DDF Roof vent kit
For all extraction mode rangehoods
For venting through the roof. Suitable for roof
inclines up to 22° and for all types of roof tile, not
suitable for at or asbestos roong.
Stainless steel casing with lead collar, ducts vapours
downwards.
DDF 125/150 extraction connection 150 mm Ø
Accessory: Reducing collar for 125 mm Ø
DDF 200 extraction connection 200 mm Ø
For all extraction mode rangehoods
Sealed, insulated wall vent kit with non-return ap for
installation in an external wall.
Extraction connection: for 100/125/150 mm Ø
Colour: grey, extraction grille in stainless steel
* New models, please check availability
Con@ctivity
XKM 2100 KM*
For all induction cooktops with DirectSelection Plus
controls
Cooktop components for transferring appliance data
to communication module XKM 2000 DA, for connec-
tion to Con@ctivity enabled induction cooktops.
Installation must be carried by a Miele Service Tech-
nician or suitable qualied person
Dimensions: 6 x 17 x 14 cm ( H x W x D)
Control cable kit for
Con@ctivity XKM*
For installing Con@ctivity module
XKM 2000 DA in rangehoods
DA 289-4 and DA 489-4
DA 6000 W
DA 7090 W and DA 7000 D
Con@ctivity
XKM 2000 DA*
For all wall-mounted and island rangehoods with run-
on function and grease lter saturation indicator.
Rangehood components for processing appliance
data from communication module XKM 2100 KM, for
integration in Con@ctivity enabled rangehoods.
Installation must be carried out by a Miele Service
Technician or suitably qualied person.
Note: To install Con@ctivity in a DA 489-4, DA 6000
W, DA 7090 W or DA 7000 D a separate control cable
kit is required.
Dimensions: 5 x 10 x 12 cm (H x W x D)