Installation Sheet

Table Of Contents
IMPORTANT SAFETY INSTRUCTIONS
9
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronized
with the grid power supply (e.g., island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronized with the grid power supply, or these measures must be
replaced by equivalent measures in the installation. As described, for
example, in the current version of VDE-AR-E 2510-2.
Operating a damaged microwave oven can result in microwave
leakage and present a hazard to the user. Do not use the microwave
oven if:
- The door is warped.
- The door hinges are loose.
- Holes or cracks are visible in the casing, the door, or the oven
compartment walls.
The electrical safety of this appliance can only be guaranteed
when correctly grounded. It is essential that this basic safety
requirement is fulfilled. If in doubt, the electrical installation should
be checked by a qualified electrician.
Proper installation: Make sure that your appliance has been
installed correctly and that it has been grounded by a qualified
technician.
The connection data (voltage and frequency) on the data plate of
the microwave oven must match the domestic electrical supply in
order to avoid the risk of damage to the microwave oven. Compare
this before connecting the appliance to the domestic electrical
supply. If in any doubt, consult a qualified electrician.