Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Before using for the first time
- Installation
- Caring for the environment
- Overview
- Control panel
- Microwave operation
- Before first use
- Settings
- Operation
- Tips for cooking with the microwave
- Using the turntable
- Starting a cooking process
- Changing the microwave power level
- Changing the cooking duration
- Interrupting and resuming a cooking process
- Canceling a cooking process
- Automatic keeping warm function –
- Oven compartment query –
- Reheat drinks
- Switching the system lock on and off
- Timer
- Quick MW and Popcorn
- Automatic Programs
- Additional applications
- Cleaning and care
- Frequently Asked Questions
- Customer Service
Control panel
28
Sensor buttons
The sensor buttons react to touch. Every tap of a sensor button is confirmed with
an audible keypad tone. You can turn this keypad tone off using | .
For information on the functions and operating modes, see “Operation”, “Settings”,
“Automatic Programs” and “Further applications”.
Sensor button Function
OK By selecting this sensor button you can access functions such
as the timer, save changes to values or settings, or confirm
instructions.
Use the arrow buttons to change values and settings.
to Use these sensor controls to select the required microwave
power level. The power for each level appears on the display in
watts.
Use this sensor control to start the Popcornfunction. The
cooking process runs at microwave power level power level
(900W) for a cooking duration of :minutes (see section
“Popcorn”).
To set the cooking duration, select | .
This function can only be used when no other cooking processes
are in use.
You can use this sensor button at any point to set a timer (e.g.,
when boiling eggs) (see “Timer”).
Use this sensor button to start a cooking process and to
increase the cooking duration by 30or 60seconds (depending
on the microwave power level).
You can also start the Quick MW function. The cooking process
runs with maximum power level (900W) and a cooking
duration of 1minute (see „Quick MW“). Touching the sensor
button repeatedly increases the cooking duration in increments.
This function can only be used when no other cooking processes
are in use.