Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Appliance description 16
- Before first use 18
- Principle of operation 19
- Functions 20
- Suitable cookware for microwave ovens 21
- Clock display 25
- Operation 26
- Automatic programs 31
- Recipes for the automatic programs ° 33
- Reheating 35
- Cooking 36
- Defrosting / Defrosting and reheating or cooking 37
- Canning 38
- Suggested uses 39
- Saving your favorite programs 40
- Changing settings 42
- Cleaning and care 44
- Frequently Asked Questions 47
- After sales service 50
- Caring for the environment 52
- Electrical connection 53
- Installation 54
- Contact details 59
Interrupting or resuming a
program
At any time you can...
...interrupt a program:
^
Press the "Stop/C" button, or open the
appliance door.
The time stops counting down.
...resume a program:
^
Close the door and press the "Start"
button.
The program will continue.
Changing the settings
After starting the program, if you
determine that...
...themicrowave power level is too
high or too low:
^ Select a new power level.
...thetime entered is too short or too
long:
^
Interrupt the program (press the
"Stop/C" button once), use the
selector knob to set a new time, and
resume the program (press the "Start"
button),
or alternatively:
^
Press the "Start" button during
operation to increase the cooking
time. Each push of the button
increases the time by another minute.
(Exception: The time increases by 30
seconds when the microwave oven is
being used at maximum power.)
Cancelling a program
^
Press the "Stop/C" button twice.
At the end of a program
An signal will sound when the cooking
program is complete. The oven interior
lighting goes out.
As a reminder, the signal will sound
briefly every 5 minutes for 20 minutes
once the program is complete.
^
If you wish to stop the signal, press
the "Stop/C" button.
Automatic "Keep warm"
function
The automatic keep-warm function will
turn on automatically at 80 W for a
maximum of 15 minutes approx. 2
minutes after the end of a cooking
program that was run at a power level
of least 450 W, provided that the door
remains closed and no buttons are
pressed.
h,80WandH:H will appear in the
display.
Opening the door or operating one of
the buttons or selectors while the auto
-
matic keep-warm function is in
progress will cancel the function.
The automatic keep-warm function
cannot be set as a separate function.
Operation
28