Instructions

Options
44
Optimize Standby
"Optimize Standby" is activated by de-
fault.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a program.
The dishwasher will not turn off while
a program is running, during the delay
start period, or if there is a fault.
Optimize Standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off au-
tomatically increases to 6 hours. Doing
this will increase energy consumption.
 Turn the dishwasher off with the 
button, if it is turned on.
 Press the Start button and, simulta-
neously, switch the dishwasher on
using the  button.
Keep the Start button pressed for at
least four seconds until the Start indi-
cator light comes on.
If this does not happen, start the proce-
dure from the beginning again.
 Press the  button 8 times.
The  indicator light will flash 8 times
at short intervals.
The flashing sequence in the display
shows whether or not Optimize Standby
is activated.
–  : "Optimize Standby" activated
–  : "Optimize Standby" deactivated
 Press the Start button to change the
setting.
The setting is now stored in memory.
 Turn the dishwasher off with the 
button.