Fully Integrated 18” MasterCool F 2411 Vi F 2461 Vi / F 2471 Vi Shown: F 2471 Vi merged with K 2801 Vi Please note: This information is subject to change 8mieleusa.
Fully Integrated 18” MasterCool SPECIFICATIONS Overall Unit Dimensions 173/4” (451 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche Minimum Cabinet Niche Opening 18” (458 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D Electrical Electrical Requirements F 24x1 Vi 110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations, a separate outlet must be used for each appliance. Power Cord NEMA 5-15 plug, 5 ft (1.
Fully Integrated 18” MasterCool CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 18” MasterCool POWER SUPPLY AND WATER CONNECTION Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Fully Integrated 18” MasterCool | F 2411 Vi CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding cabinets.
Fully Integrated 18” MasterCool | F 2411 Vi DOOR PANEL DIMENSIONS KFP1804 - Door Panel Available as an accessory for the following models: • F 2411 Vi Page 6 of 9
Fully Integrated 18” MasterCool | F 2461 Vi / F 2471 Vi CUSTOM PANEL INSTALLATIONS Freezer Upper Panel HOMHOC HOC Miele Fully Integrated Miele Freezer Fully Integrated Panel Height Panel Height Panel Height These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet maker. Miele has a unique with panel integration system which allows the panelsatocustom align with the surrounding These units donot not come equipped frontpanel. panel.
Fully Integrated 18” MasterCool | F 2461 Vi / F 2471 Vi DOOR PANEL DIMENSIONS & DISPENSER CUTOUT KFP 1844 - Door Panel Available as an accessory for the following models: • F 2461 Vi • F 2471 Vi Page 8 of 9
Fully Integrated 18” 1MasterCool 15° Door HINGING ThDETAILS ickne115° ssOPENING options Available for the following models: • F 24x1 Vi 0-1/8" 0-1/8” (3 mm) 0-3/4” (19 mm) 0-3/4" 1” (25 mm) 1" 1-1/4” (32 mm) 1-1/4" 1-1/2” (38 mm) 1-1/2" 1-3/4” (44 mm) 1-3/4" 90° Door 115° Door Thickness options 0-3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) Cabinet Front binet Front 0-3 /4” mm ) 3”(76.2mm) 1-3/4”(44.