Installation Instructions 30" Electric, 30" Induction Range 30", 36" All Gas Range 30", 36", 48" Dual Fuel Range To prevent accidents and damage to the range, you must read all instructions supplied before installing or using the appliance. en-US, CA M.-Nr.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front and the door or allow soil or cleaner residue to accumulate on sealing surfaces.
IMPORTANT SAFETY INSTRUCTIONS WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. This range must be secured and connected using the anti-tip device according to the installation instructions. If you have moved the range, slide the locking latch onto the antitip device until you feel it lock into place. Do not use the range if the anti-tip device has not been properly installed and engaged.
IMPORTANT SAFETY INSTRUCTIONS WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death. – Do not use or store gasoline or other combustible liquids or vapors in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS – Do not try to light any appliance. – Do not touch any electric switches. – Do not use any phones inside your building.
Contents PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY .......................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 3 IMPORTANT SAFETY INSTRUCTIONS ................................................................ 7 Notes on installation ........................................................................................... Model numbers ...................
Contents Detailed views of HR 1936-2................................................................................. Detailed views of HR 1954-2................................................................................. Detailed views of HR 1955-2................................................................................. Detailed views of HR 1956-2................................................................................. 81 85 89 93 Anti-tip device......................................
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the range to prevent accidents and machine damage. This range complies with current safety requirements. However, improper use of the appliance can result in personal injury or damage to property. Please read the installation instructions carefully before installing and connecting the appliance.
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use of the oven to prevent accidents and machine damage. WARNING - To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy: This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This range is intended for domestic use and use in other similar environments. This appliance is not intended for outdoor use. Use the range exclusively under normal domestic conditions: – Use the oven for baking, roasting, broiling, defrosting, canning and drying food. – Use the stovetop to prepare food and keep it warm. Any other use is not permitted. Risk of Fire! Do not use this oven to store or dry combustible materials.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the range unless constantly supervised. Please supervise any children in the vicinity of the range and do not let them play with the appliance. Burn hazard from improper use! Do not allow children to operate the oven. Danger of suffocation! Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician. Do not carry or lift the range by the oven door handle or the control panel! Check whether the anti-tip device is properly installed and locked into place (see“Anti-tip device”): – The anti-tip device must be fastened to the floor or wall with suitable screws.
IMPORTANT SAFETY INSTRUCTIONS During installation, maintenance and repair work, e.g. if the oven lighting is broken, the range must be completely disconnected from the household electricity supply (see“Frequently asked questions”). The gas inlet valve must be closed. It is only completely isolated from the supply when: – The circuit breakers have been switched off, or – the fuses of the electrical installation have been completely removed, or – the plug (if present) is removed from the socket.
IMPORTANT SAFETY INSTRUCTIONS This appliance must not be installed and operated in mobile installations (e.g. on a ship). Any repairs not performed by a Miele authorized service technician will void the warranty. Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS The water shutoff valve must be accessible after the range has been installed. The integrated Waterproof System offers protection against water damage if the following conditions are met: – The range is properly installed (connected to electric and water supply). – The range is repaired immediately whenever damage is detected. – The water supply is shut off during extended periods of non-use (e.g. vacation).
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance The steam from a steam cleaning appliance could reach live electrical components and cause a short circuit. Do not use a steam cleaner to clean the range. Only clean parts listed in these Operating and Installation Instructions. Scratches on the door glass can cause the glass to break. Do not use abrasive cleaners, hard sponges, brushes or sharp metal tools to clean the door glass.
Notes on installation Model numbers Distance to the range hood A list of the ovens described in these operating instructions can be found on the back page. The minimum clearance between the appliance and a range hood above will be listed by the hood manufacturer. Data plate If there is more than one appliance installed below the range hood, each with a different safety clearance, the largest clearance must be used. The data plate is behind the toe-kick.
Notes on installation Toe-kick and drip tray 30“ and 36” range The components are located in the packaging of the range. 48" range The components are already installed. Installation of the drip tray The drip tray covers the gap between the oven cavity and the door. Open the oven door. Installation of the toe-kick The toe-kick has sheet metal lugs and magnets by means of which it can be positioned and attached to the base of the range.
Notes on installation Assembling the grill Burn hazard! The burners must be turned off and allowed to cool completely. Risk of injury! The cast-iron grill is heavy. Carry the grill carefully and place it securely on a soft base so that it lies flat. a Grill b Radiant plate c Frame Using a soft sponge, clean radiant plate with a solution of warm water and a small amount of liquid dish soap. Dry the parts thoroughly after cleaning. Remove the grill from the gas cooktop.
Notes on installation Optional accessories All Gas Range All accessories and cleaning products listed in these instructions are designed to be used with the Miele range. Hot vapors are emitted above the island trim during Self Clean as well as when cooking food in the oven. The emission of vapors can soil and discolor surfaces above the island trim.
Notes on installation Mounting the RBGAG All Gas Backguard 1 2 3 The rear of the range must be accessible. Mount the backguard before installing the anti-tip device and connecting of the range. Loosen the screws of the island trim. Pull back the island trim slightly until it can be removed. 1 2 2 a Backguard b Rear panel backguard c Interior panel To avoid scratching the backguard , place it front side downwards on a soft surface (e.g., a blanket).
Notes on installation 1 2 Secure the interior panel and the rear panel to the backguard with the screws supplied. Secure the backguard to the range with the screws supplied. Backguard 12" a Backguard b Range Push the backguard over the air duct extensions from above. Backguard 20" As soon as the backguard is sitting on the range, push the backguard backwards.
Notes on installation Installing the RBGDF Dual Fuel Backguard The rear of the range must be accessible. Install the backguard before installing the anti-tip device and connecting of the range. Loosen the screws of the island trim. Pull back the island trim slightly until it can be removed. The backguard can be installed in reverse order. 22 RBS Backsplash The backsplash is intended for installation to a Miele Range Hood (DAR model). Observe the installation instructions of the Miele Range Hood.
Notes on installation Do not carry or lift the range by the oven door handle or the control panel! The range is heavy. Due to the size and weight of the appliance, installation should be performed by two people. The net weight of the range with accessories is as follows: Model Width Net weight incl. accessories HR 1421 HR 1622-2 HR 112x HR 1724 HR 192x-2 29 15/16"" approx. 307 lbs (140 kg) HR 113x-1 HR 193x-2 35 15/16"" HR 195x-2 47 15/16"" (762 mm) approx. 405 lbs (180 kg) (915 mm) approx.
Notes on installation Required connections Model Electrical connection Gas connection Plumbed water connection HR 1421 Yes – – HR 1622-2 Yes – Yes HR 112x HR 113x-1 Yes Yes – HR 172x Yes Yes – HR 192x-2 HR 193x-2 HR 195x-2 Yes Yes Yes 24
All Electric Range dimensions HR 1421, HR 1622-2 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection (HR 1622-2 only) 25
All Electric Range dimensions HR 1421, HR 1622-2 Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (547 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface min. 30" (762 mm) 30" (762 mm) or 24" (609 mm) Niche width Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface.
All Electric Range dimensions Detailed views of HR 1421 Side view of HR 1421 (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
All Electric Range dimensions Detailed front side view of HR 1421 28
All Electric Range dimensions Front side view of HR 1421 (x) = Depending on the appliance height adjustment 5" - 6 1/2" (127 mm - 165.
All Electric Range dimensions Rear view of HR 1421 E = Electrical connection 30
All Electric Range dimensions Detailed views of HR 1622-2 Side view of HR 1622-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Electric Range dimensions Detailed front side view of HR 1622-2 32
All Electric Range dimensions Front view of HR 1622-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Electric Range dimensions Rear view of HR 1622-2 E = Electrical connection W = Water connection 34
All Gas Range dimensions All Gas Range HR 1124 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, G = Gas connection Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (457 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum distance to combustible surfaces.
All Gas Range dimensions Position Dimensions Description min. 30" (762 mm) Niche width Please contact Miele Technical Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower).
All Gas Range dimensions All Gas Range HR 1134-1, HR 1135-1, HR 1136-1 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, G = Gas connection Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (457 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum distance to combustible surfaces.
All Gas Range dimensions HR 1134-1, HR 1135-1, HR 1136-1 Position Dimensions Description min. 36" (915 mm) Niche width Please contact Miele Technical Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower).
All Gas Range dimensions Detailed views of HR 1124 Side view of HR 1124 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions Detailed front side view of HR 1124 40
All Gas Range dimensions Front side view of HR 1124 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
All Gas Range dimensions Rear view of HR 1124 G E = Electrical connection G = Gas connection 42
All Gas Range dimensions Detailed views of HR 1134-1 Side view of HR 1134-1 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Gas Range dimensions Detailed front side view of HR 1134-1 44
All Gas Range dimensions Front view of HR 1134-1 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Gas Range dimensions Rear view of HR 1134-1 E = Electrical connection G = Gas connection 46
All Gas Range dimensions Detailed views of HR 1135-1 Side view of HR 1135-1 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Gas Range dimensions Detailed front side view of HR 1135-1 48
All Gas Range dimensions Front view of HR 1135-1 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Gas Range dimensions Rear view of HR 1135-1 E = Electrical connection G = Gas connection 50
All Gas Range dimensions Detailed views of HR 1136-1 Side view of HR 1136-1 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Gas Range dimensions Detailed front side view of HR 1136-1 52
All Gas Range dimensions Front view of HR 1136-1 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
All Gas Range dimensions Rear view of HR 1136-1 E = Electrical connection G = Gas connection 54
Dual Fuel Range dimensions Dual Fuel Range HR 1724 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, G = Gas connection Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (457 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum distance to combustible surfaces.
Dual Fuel Range dimensions Position Dimensions Description min. 30" (762 mm) Niche width Please contact Miele Technical Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower).
Dual Fuel Range dimensions Dual Fuel Range HR 1924-2 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection, G = Gas connection Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (457 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum distance to combustible surfaces.
Dual Fuel Range dimensions Position Dimensions Description min. 30" (762 mm) Niche width Please contact Miele Technical Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower).
Dual Fuel Range dimensions Dual Fuel Range HR 1934-2, HR 1935-2, HR 1936-2 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection, G = Gas connection Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (457 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum distance to combustible surfaces.
Dual Fuel Range dimensions HR 1934-2 Position Dimensions Description min. 36" (915 mm) Niche width Please contact Miele Technical Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 36" (915 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL blower).
Dual Fuel Range dimensions HR 1935-2, HR 1936-2 Position Dimensions Description min. 36" (915 mm) Niche width Please contact Miele Technical Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 30" (762 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL or DRxB XXL blower).
Dual Fuel Range dimensions Dual Fuel Range HR 1954-2, HR 1955-2, HR 1956-2 2 , , The shaded area represents the installation area for the connections: E = Electrical connection, W = Plumbed water connection, G = Gas connection Position Dimensions Description 13" (330 mm) Maximum depth of top cabinet 18" (457 mm) Minimum distance to bottom edge of top cabinet 35 1/2"–37" (901–940 mm) Distance from the floor to cooktop surface 10" (254 mm) Minimum distance to combustible surfaces.
Dual Fuel Range dimensions HR 1954-2 Position Dimensions Description min. 48" (1220 mm) Niche width Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 36" (915 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XXL blower).
Dual Fuel Range dimensions HR 1955-2, HR 1956-2 Position Dimensions Description min. 48" (1220 mm) Niche width Please contact Miele Service for more information. 37" (940 mm) Minimum distance between the top of the cooking area and the bottom of an unprotected combustible surface. 36" (915 mm) Minimum distance between the top of the cooking area and the bottom of the Miele Range Hood (DAR model with DRxB XL blower).
Dual Fuel Range dimensions Detailed views of HR 1724 Side view of HR 1724 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions Detailed front side view of HR 1724 66
Dual Fuel Range dimensions Front side view of HR 1724 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm - 165.
Dual Fuel Range dimensions Rear view of HR 1724 G E = Electrical connection G = Gas connection 68
Dual Fuel Range dimensions Detailed views of HR 1924-2 Side view of HR 1924-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Detailed front side view of HR 1924-2 70
Dual Fuel Range dimensions Front view of HR 1924-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Rear view of HR 1924-2 E = Electrical connection W = Water connection G = Gas connection 72
Dual Fuel Range dimensions Detailed views of HR 1934-2 Side view of HR 1934-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Detailed front side view of HR 1934-2 74
Dual Fuel Range dimensions Front view of HR 1934-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Rear view of HR 1934-2 E = Electrical connection W = Water connection G = Gas connection 76
Dual Fuel Range dimensions Detailed views of HR 1935-2 Side view of HR 1935-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Detailed front side view of HR 1935-2 78
Dual Fuel Range dimensions Front view of HR 1935-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Rear view of HR 1935-2 E = Electrical connection W = Water connection G = Gas connection 80
Dual Fuel Range dimensions Detailed views of HR 1936-2 Side view of HR 1936-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Detailed front side view of HR 1936-2 82
Dual Fuel Range dimensions Front view of HR 1936-2 (x) = Depending on the appliance height adjustment: 5" - 6 1/2" (127 mm 165.
Dual Fuel Range dimensions Rear view of HR 1936-2 E = Electrical connection W = Water connection G = Gas connection 84
Dual Fuel Range dimensions Detailed views of HR 1954-2 Side view of HR 1954-2 (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm 139.
Dual Fuel Range dimensions Detailed front side view of HR 1954-2 86
Dual Fuel Range dimensions Front view of HR 1954-2 (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm 139.
Dual Fuel Range dimensions Rear view of HR 1954-2 E = Electrical connection W = Water connection G = Gas connection 88
Dual Fuel Range dimensions Detailed views of HR 1955-2 Side view of HR 1955-2 (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm 139.
Dual Fuel Range dimensions Detailed front side view of HR 1955-2 90
Dual Fuel Range dimensions Front view of HR 1955-2 (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm 139.
Dual Fuel Range dimensions Rear view of HR 1955-2 E = Electrical connection W = Water connection G = Gas connection 92
Dual Fuel Range dimensions Detailed views of HR 1956-2 Side view of HR 1956-2 (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm 139.
Dual Fuel Range dimensions Detailed front side view of HR 1956-2 94
Dual Fuel Range dimensions Front view of HR 1956-2 (x) = Depending on the appliance height adjustment: 4" - 5 1/2" (101.6 mm 139.
Dual Fuel Range dimensions Rear view of HR 1956-2 E = Electrical connection W = Water connection G = Gas connection 96
Anti-tip device Before installation WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries. Make sure that the anti-tip device is properly installed and locked into place. It should be screwed to the floor or wall and engage with the center of the bottom of the range. You must take care to protect the installed flooring when moving the range. After moving the range, make sure that the anti-tip device locks back into place.
Anti-tip device Checking the installation space Install the anti-tip device on a floor capable of bearing significant weight, such as a concrete floor, concrete wall or timber framing. The surface must be flat and level. If the rear of the range has distance A to the supporting wall due to unevenness or wall covering (e.g., tile level), you must install the anti-tip device to the supporting floor.
Anti-tip device Check the diagrams for the building's supply lines. Make sure that you do not damage any lines when drilling the holes to attach the anti-tip device. Check the position of the electric, gas and water connections (see “Electrical connection,” “Gas connection” and “Plumbing”). An overview on the electrical connections for your range can be found in “Notes on installation”.
Anti-tip device Included accessories Installing the range with the anti-tip device – 1 anti-tip device Wear safety shoes and gloves. – 4 screws – 4 plugs The anti-tip device should be installed at the bottom rear of the range at the midpoint of the width. Installation dimensions of locking bolt X Measure the installation space for the range close to floor level. Mark the wall at the middle of the space width. Position the notch of the anti-tip device on the wall marking.
Anti-tip device 2 Screw the locking nut to the bolt, see the “Installation dimensions of locking bolt” table. 1 3 Attaching to the floor 2 1 3 Attaching to the wall a Anti-tip device b Screws c Locking nut Secure the anti-tip device to the floor surface with suitable bearing capacity, either to the floor or wall. using four screws .
Anti-tip device Do not push the range into position before all supply connections have been established. The toe kick cover is attached to the base of the range by magnets. The locking clamp extends through the toe kick cover of the range housing. Its length is approximately equal to the depth of the range. It can be pulled out and pushed back in again. Its length is approximately equal to the depth of the range. A slot is located in the non-visible rear section of the locking latch.
Anti-tip device Complete all necessary connections for the range. Read the “Electrical connection”, “Gas connection”, and “Plumbed water connection” chapters for more information. The range can be aligned if necessary. Check it with a spirit level. The range can be damaged if it is lifted using the cover, the trim or the door handle. Open the oven door and hold the appliance by the front of the oven cavity. Lift the range and move it with the help of the rear wheels.
Anti-tip device In the range housing, there is an opening for the bolt of the anti-tip device. The opening allows the range to be slid onto the anti-tip device and back to the wall. The locking clamp must noticeably engage with the bolt so that anti-tip protection is ensured for the range. Disconnecting the range from the anti-tip device WARNING Children and adults can tip over the range if has not been secured. This may lead to fatal injuries.
Electrical connection ATTENTION: During installation, maintenance and repair work, the range must be disconnected from the electrical supply. It is only completely isolated from the electrical supply if the plug fuses have been fully unscrewed (where applicable), the circuit breaker has been tripped or the power cord has been unplugged from the wall outlet. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
Electrical connection Electrical connection Model Power cord NEMA For electrical supply with USA Canada HR 1421 approx. 5' 11" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 40 A 60 Hz HR 1622-2 approx. 5' 11" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 40 A 60 Hz HR 195x-2 approx. 5' 11" (1.80 m) 14-50 P plug 120/208 V or 120/240 V 50 A 40 A 60 Hz HR 172x HR 192x-2 HR 193x-2 approx. 5' 11" (1.
Plumbing Notes on connecting to the water supply The appliance must be connected to the water supply by a qualified professional. Disconnect the appliance from the power supply before connecting it to the water line. Turn off the water supply before connecting the water lines for the range. – All devices used for connecting the appliance to the water supply must comply with the current national and local safety regulations in the country in which the range is being installed.
Plumbing Attach the stainless steel hose to the range. Make sure that the stainless steel hose is not kinked or damaged. The stainless steel hose must not be shortened. Remove the cover from the water supply connection at the back of the range. Connecting to the water supply Danger of electric shock! Disconnect the range from the electrical supply before connecting it to the water supply. Check that the gasket is present. Replace, if not, insert before connecting to the water supply.
Gas connection Connection to the gas supply may only be performed by a duly authorized technician. This technician is responsible for proper function at the installation site. In Massachusetts, the gas connection may be performed only by a certified gas installer. The range must be connected with its own shut-off valve. The shut-off valve must be accessible and visible, after the opening of a cabinet door, if necessary.
Gas connection The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54. The gas pressure may not undershoot or exceed certain values. Make sure that the maximum gas pressure upstream of the gas pressure controller does not amount to more than 1/2 psi (3.5 kPA) for natural and propane gas.
Burner ratings Burner ratings HR 1124 Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Oven top burner 22,000 6.4 Oven bottom burner 23,200 6.8 Total cooktop output 71,000 20.8 Maximum total output of Range 94,200 27.6 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Oven top burner 20,150 5.9 Oven bottom burner 23,200 6.8 Total cooktop output 71,000 20.8 Maximum total output of Range 94,200 27.
Burner ratings Burner ratings HR 1134-1 Natural gas NG Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Oven top burner 22,000 6.4 Oven bottom burner 25,500 7.5 Total cooktop output 84,500 24.8 Maximum total output of Range 110,000 32.2 Liquid propane LP Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Oven top burner 20,150 5.9 Oven bottom burner 27,500 8.
Burner ratings Burner ratings HR 1135-1 Natural gas NG Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Grill 19,000 5.6 Oven top burner 22,000 6.4 Oven bottom burner 25,500 7.5 Total cooktop output 75,000 22.0 Maximum total output of Range 100,500 29.
Burner ratings Burner ratings HR 1136-1 Natural gas NG Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Griddle 13,000 3.8 Oven top burner 22,000 6.4 Oven bottom burner 25,500 7.5 Total cooktop output 69,000 20.2 Maximum total output of Range 94,500 27.7 Liquid propane LP Btu/hr kW Simmer burner 8,000 2.3 Power burner, rear 9,000 2.6 Power burner, front 19,500 5.7 Griddle 14,300 4.2 Oven top burner 20,150 5.
Burner ratings Burner ratings HR 1724 Natural gas NG Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Total cooktop output 71,000 20.8 Liquid propane LP Btu/hr kW Simmer burner 12,500 3.7 Power burner 19,500 5.7 Total cooktop output 71,000 20.
Burner ratings Burner ratings HR 1924-2 Natural gas NG Btu/hr kW Simmer burner 12.500 3.7 Power burner 19.500 5.7 Total cooktop output 71.000 20.8 Liquid propane LP Btu/hr kW Simmer burner 12.500 3.7 Power burner 19.500 5.7 Total cooktop output 71.000 20.
Burner ratings Burner ratings HR 1934-2 Natural gas NG Btu/hr kW Simmer burner 12.500 3.7 Power burner, rear 13.600 4.0 Power burner, front 19.500 5.7 Total cooktop output 98.200 28.8 Liquid propane LP Btu/hr kW Simmer burner 12.500 3.7 Power burner, rear 13.000 3.8 Power burner, front 19.500 5.7 Total cooktop output 97.000 28.
Burner ratings Burner ratings HR 1935-2 Natural gas NG Btu/hr kW Simmer burner 12.500 3.7 Power burner, rear 13.600 4.0 Power burner, front 19.500 5.7 Grill 19.000 5.6 Total cooktop output 84.100 24.
Burner ratings Burner ratings HR 1936-2 Natural gas NG Btu/hr kW Simmer burner 12.500 3.7 Power burner, rear 13.600 4.0 Power burner, front 19.500 5.7 Griddle 13.000 3.8 Total cooktop output 78.100 22.9 Liquid propane LP Btu/hr kW Simmer burner 12.500 3.7 Power burner, rear 13.000 3.8 Power burner, front 19.500 5.7 Griddle 14.300 4.2 Total cooktop output 78.800 23.
Burner ratings Burner ratings HR 1954-2 Natural gas NG Btu/hr kW Simmer burner 10.000 2.9 Power burner, rear 13.600 4.0 Power burner, front 19.500 5.7 Total cooktop output 125.200 36.7 Liquid propane LP Btu/hr kW Simmer burner 10.000 2.9 Power burner, rear 13.000 3.8 Power burner, front 19.500 5.7 Total cooktop output 124.000 36.
Burner ratings Burner ratings HR 1955-2 Natural gas NG Btu/hr kW Simmer burner 10.000 2.9 Power burner, rear 13.600 4.0 Power burner, front 19.500 5.7 Grill 19.000 5.6 Total cooktop output 111.100 32.
Burner ratings Burner ratings HR 1956-2 Natural gas NG Btu/hr kW Simmer burner 10.000 2.9 Power burner, rear 13.600 4.0 Power burner, front 19.500 5.7 Griddle 13.000 3.8 Total cooktop output 105.100 30.8 Liquid propane LP Btu/hr kW Simmer burner 10.000 2.9 Power burner, rear 13.000 3.8 Power burner, front 19.500 5.7 Griddle 14.300 4.2 Total cooktop output 105.800 31.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
HR 1421, HR 1622-2, HR 1124, HR 1134-1, HR 1135-1, HR 1136-1, HR 1724, HR 1924-2, HR 1934-2, HR 1935-2, HR 1936-2, HR 1954-2, HR 1955-2, HR 1956-2 en-US, CA M.-Nr.
