Operating and Installation Instructions Fridge-freezer Combination To prevent accidents and machine damage, read these instructions before installation or use. en-US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 6 Caring for the environment ................................................................................ 15 Installation information ....................................................................................... Installation location ............................................................................................... Climate class ..................................................
Contents Accessories ......................................................................................................... 52 Accessories supplied ............................................................................................ 52 Optional accessories............................................................................................. 53 Before first use .................................................................................................... Before first use .............
Contents Removing the freezer baskets............................................................................... 84 Removing the dividing panel (depending on the model).................................. 84 Removing the ice cube tray................................................................................... 85 Storing food in the refrigerator section............................................................. Different storage zones ...............................................................
Contents Declaration of conformity .................................................................................
IMPORTANT SAFETY INSTRUCTIONS This appliance complies with all statutory safety requirements. Please note that inappropriate use can lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for non-compliance with these instructions.
IMPORTANT SAFETY INSTRUCTIONS This appliance is intended for domestic use only for cooling and storing food and drink as well as for storing deep frozen food, freezing fresh food and for making ice. Any other usage is not supported by the manufacturer and could be dangerous. This appliance is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations or other such materials or products.
IMPORTANT SAFETY INSTRUCTIONS The electrical safety of the appliance can only be guaranteed when correctly grounded. It is essential that this standard safety requirement is met. If in any doubt please have the electrical installation tested by a qualified electrician. Reliable and safe operation of this appliance can only be assured if it has been connected to the electricity supply.
IMPORTANT SAFETY INSTRUCTIONS – the circuit breaker has been removed completely, or – the power cord has been unplugged. Pull on the plug and not on the power cord when disconnecting it from the power supply. Unauthorized installation, maintenance, and repairs, or a faulty fresh water connection can cause considerable danger for the user.
IMPORTANT SAFETY INSTRUCTIONS If storing food which contains a lot of fat or oil in the appliance, make sure that it does not come into contact with plastic components as this could cause stress cracks or break the plastic. Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Electrical components could cause flammable vapors to ignite. DANGER of fire and explosion. Do not operate any electrical equipment (e.g.
IMPORTANT SAFETY INSTRUCTIONS When eating stored food, there is a danger of food poisoning. Storage times will depend on several factors, including the freshness and quality of the food, as well as the temperature at which it is stored. Observe the manufacturer's “use-by” dates and storage instructions. Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become invalid.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or pointed objects to – remove frost or ice, – separate frozen foods or remove ice trays.
IMPORTANT SAFETY INSTRUCTIONS Transport To avoid damage to the appliance, always transport it upright and in its packaging. DANGER of injury and damage. The appliance is very heavy and must be transported by two people.
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance Children could become trapped in the machine and could suffocate. – Remove the machine doors. – Remove the drawers. – Leave the adjustable shelves in the machine so children cannot climb inside. DANGER of electric shock! – Cut the plug off the power cord. – Cut the power cord off the old appliance. Dispose of them separately from the appliance.
Caring for the environment Disposal of packaging material Disposal of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain valuable materials.
Installation information Risk of injury and damage. This appliance must be built in, otherwise it could tip over. Keep the appliance door(s) shut until the appliance has been built in and secured in its housing in accordance with the operating and installation instructions. Fire hazard and risk of damage. The appliance must not be installed underneath a cooktop. Installation location This appliance should be installed in a dry, well-ventilated room.
Installation information Climate class Installation notes The appliance is designed for use within a certain climate range (ambient temperatures) and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance. Load-bearing capacity of the niche floor The floor of the space where the appliance is to be installed must be flat and level. Climate class Room temperature It must be made from strong, rigid material.
Installation information Ventilation WARNING! Risk of fire! Operation of the appliance is limited. Keep the required ventilation gaps free from obstruction. Noncompliance with the specified dimensions for the ventilation grille will cause the compressor to turn on more often and run for longer periods. This causes increased energy consumption and an increased compressor operating temperature, which can result in damage to the compressor. Do not block the ventilation gaps.
Installation information Side-by-side This appliance can be installed side-byside with another refrigeration appliance. The following overview will show you which side-by-side options you have with your appliance: A side-by-side merging kit and a top frame (KTF) are required for this. Both are available from your Miele dealer or Miele Technical Service. Instructions for installing appliances side-by-side can be found in the sideby-side merging kit instruction manual.
Installation dimensions – The electrical connection must not be positioned higher than 9" above the floor. – The 1/4" plumbed water connection should not be positioned higher than 2" above the floor.
Installation dimensions KF 2801 SF, KF 2811 SF (≥ ≥ 24 " 61 0m m) 3/4 (19 " mm ) /16" 85 3 mm) 84" – – 2164 4 (213 30" mm) (762 1 3/16" (30 mm) 9 5/8" (244 mm) 3 5/8" (92 mm) 7/8" (22 mm) 4" (102 mm) 4" (102 mm) Side view 21
Installation dimensions KF 2901 SF, KF 2911 SF (≥ ≥ 24 " 61 0m m) 3/4 (19 " mm ) /16" 85 3 mm) 84" – – 2164 4 (213 36" mm) (915 1 3/16" (30 mm) 9 5/8" (244 mm) 3 5/8" (92 mm) Side view 22 7/8" (22 mm) 4" (102 mm) 4" (102 mm)
Installation dimensions Dimensions when the appliance door is open (opening angle 90°) KF 2801 SF, KF 2811 SF 23
Installation dimensions KF 2901 SF, KF 2911 SF 24
Installation dimensions Dimensions when the appliance door is open (opening angle 115°) KF 2801 SF, KF 2811 SF 115 ° 25
Installation dimensions KF 2901 SF, KF 2911 SF 16 7/8" (428 mm) 115° 26 -- / / / ,
Building in the appliance Before starting... It is essential to read these installation instructions carefully before starting to install the appliance. The appliance should be installed by a suitably qualified tradesman in accordance with these installation instructions. Safe operation of the appliance is only assured if it has been installed and connected in accordance with the installation instructions. Risk of damage and injury! This appliance is very heavy and can tip forwards when the door is open.
Building in the appliance Aligning the installation niche Checking the installation space Check the installation dimensions. Check the position of the electrical and plumbing connections. Check that all adjacent cabinets / units are securely fixed to the wall. Check the adjacent cabinets / units for possible collisions when opening doors (door opening angle). The installation niche must be carefully aligned using a level before installing the appliance.
Building in the appliance Before installation Heavy weight! This appliance is very heavy and can tip forwards when the door is open. Risk of tipping over! Make sure the appliance is no longer secured to the pallet as soon as you unscrew the brackets that fix the appliance to the pallet. Prepare the plumbed water connection for the appliance (see “Plumbed water connection”). Before installation, remove any accessories from the back of the appliance.
Building in the appliance Preparing the installation niche Keep the appliance door closed until the appliance is secured inside the niche. Securing the installation niche The provided anti-tip brackets ensure the installation niche is securely fixed to the wall. Risk of tipping over! The installation niche must be fixed to the wall behind it with several screws. Only this can ensure that the appliance will not tip over after being installed.
Building in the appliance 2 Fixing screws for different uses and types of material are supplied in the accompanying pack: 2 2 Make sure that the gap between the appliance's rear wall and the installation niche does not exceed 2" (51 mm). Securing to concrete wall Place a wooden wedge behind the anti-tip brackets if necessary. 2 While holding the anti-tip brackets in place, mark the necessary drill holes on the rear wall of the installation niche.
Building in the appliance Pushing the appliance into the niche 2 Securing with a wooden wedge Secure the installation niche to the wall using the anti-tip brackets . Push the appliance into the niche, taking care not to damage the power cord and plumbed water connections. If you are installing several appliances side by side, now secure the appliances to one another (see the instructions for the side-by-side installation kit).
Building in the appliance 5 Tip: To secure the power cord to prevent it becoming caught: Tie a piece of string to the middle of the cord and as the appliance is being pushed into the niche, pull the cord forward underneath the appliance . Carefully push the appliance into the niche. If the appliance cannot be pushed into the niche (because the floor is uneven, for example), unscrew the rear feet slightly (see “Aligning the appliance”) and slide the appliance into the niche.
Building in the appliance Aligning the appliance Align the appliance with neighboring cabinet fronts. The adjustable feet at the front and back of the appliance can all be adjusted from the front. Risk of damage! Do not under any circumstances use a cordless screwdriver to adjust the front and rear feet. 34 Position the supplied spacers on both sides on the markings next to the adjustable feet at the front of the appliance.
Building in the appliance Adjust the rear feet with a ratchet (attachment: 5/16" (8 mm) socket) or a TX 20 screwdriver. Adjust the front feet with a ratchet (attachment: 5/16" (8 mm) socket) or a TX 20 screwdriver. Tip: Proceed carefully when adjusting the feet, alternating between the left and right feet. Unscrew the feet and on both sides at least until the marking on the base is aligned with the required 1 1/4" (32 mm) on the spacer .
Building in the appliance Risk of damage! Unscrew the feet only until the marking on the base is aligned to a maximum of 2 7/16" (62 mm) (max. niche height of 85 3/16" (2164 mm)). Otherwise the rear foot adjustment will be damaged. Use a level to check the alignment of the appliance. Securing the appliance in the niche Use the screws supplied to secure the refrigeration appliance on both sides.
Building in the appliance Connect the appliance to the household water supply (see “Plumbed water connection”). Securing the base cover plate and the baseboard Do not cover the vents in the base. This will damage the appliance! Click the baseboard onto the bottom of the appliance base. Aligning the appliance doors After installation, align the appliance doors with adjacent cabinetry fronts. To do this, check the gaps to the adjacent cabinetry fronts. Remove the film from the base cover plate .
Building in the appliance Slightly loosen the screws in the angle trims on both sides of the top and bottom appliance door. Remove the covers from the bottom fixing brackets. Remove the cover from the light contact switch of the top appliance door. Loosen the screws on the fixing brackets slightly. Remove the covers from both sides of the top and bottom appliance door.
Building in the appliance Remove the nuts and washers from the threaded bolts of the top and bottom appliance door. If necessary, also align the depth of the appliance doors via the gaps in the angle trims. Close the appliance doors and check the distance between the door and adjacent cabinetry fronts again. Then re-tighten all screws and . Align the height and sides of the appliance doors using the threaded bolts .
Adjusting the door opening angle (optional accessory) Depending on the installation site, it may be necessary to adjust the door opening angle to 90°. Open the door. Insert the banking pin through the holes and drive in with a hammer. The door opening angle is now limited to 90°.
Electrical connection Risk of electric shock! The appliance must only be switched on when it has been installed in accordance with the installation instructions. Ground the appliance. The appliance must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit. Do not use extension cords or ungrounded (two prong) adapters.
Electrical connection If the outlet is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole disconnect device with a contact opening of at least 1/8" (3 mm). These can be circuit breakers, fuses, and relays. Connecting the appliance The plug and power cord must not come into contact with the back of the appliance as vibrations can cause damage to these components.
Water connection Information on the fresh water connection The machine may only be connected to the fresh water supply by qualified technicians. Disconnect the machine from the power supply before connecting it to the fresh water supply. Turn off the water supply before connecting the water supply line for the ice cube maker. The water quality must comply with the requirements for drinking water in the country in which the machine is being operated. WARNING! Connect to potable water supply only.
Water connection Installing the water hose to the appliance Before establishing the plumbed-water connection, ensure that the appliance is disconnected from the power supply. 7/16" 2 When installing the water hose, make sure that it is neither kinked nor damaged. By this time, the installation niche should already have been prepared so that the appliance needs only to be pushed into it. Position the appliance slightly in front of the installation niche so that the shut-off valve can still be accessed.
How to save energy Installation / Maintenance Temperature setting Normal energy consumption Increased energy consumption In a well-ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, range/oven). Near a heat source (radiator, oven). Where the ideal room temperature is approx. 68°F (20°C). Where the ambient room temperature is above 77°F (25°C). Air vents uncovered and dusted regularly.
How to save energy Normal energy consumption Use Increased energy consumption The drawers, and shelves are arranged as they were when the appliance was delivered. Only open the door when necessary and for as short a time as possible. Store food in an organized way. Frequent opening of the door for long periods will cause a loss of coldness. The appliance will try to cool down and the compressor will run for longer periods.
Guide to the appliance a Automatic door opening (Push2Open/ Pull2Open mechanism) b Display c On/Off switch d Shelves e Holder for the Active AirClean filter 47
Guide to the appliance f Interior lighting g Hanging drawer h Door shelves in the appliance door i Humidity-controlled compartment with moisture regulator for fruit and vegetables j Dry compartment with low temperature for food which goes off quickly k Ice maker l Freezer baskets m Ice-cube container n Water filter The dry compartment in the MasterFresh zone fulfills the requirements of a cold storage compartment according to EN ISO 15502.
Guide to the appliance Main screen 1 2 3 39°F 0 °F 4 5 6 7 a Automatic SuperCool display (only visible when the Automatic SuperCool function has been switched on) b Temperature display (target temperature) for the refrigerator section c Sensor control for setting the temperature d Display for Miele@home connection status (only visible when Miele@home has been set up) e SuperFrost display (only visible when the SuperFrost function has been switched on) f Temperature display (target
Guide to the appliance Settings mode The following icons can be selected in settings mode: Symbol Function Language Set Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright) Buzzer Tones Adjust the volume or switch off the Buzzer Tones completely (e.g.
Guide to the appliance Water Filter Display Switch on or off or reset (see “Selecting additional settings”) Display Active Air- Switch on or off or reset (see “Selecting additional settings”) Clean Filter Symbols in settings mode / Scroll in settings mode or select a setting / Change a setting (e.g.
Accessories Accessories supplied Appliance plug Labels for the MasterFresh zone Each type of food has its own characteristics which determine the specific storage conditions it requires. Dry compartment label Active AirClean filters This Active AirClean filters neutralize unpleasant odors in the refrigerator section for optimal air quality. The holder for the Active AirClean filters is in the refrigerator section.
Accessories Optional accessories A range of useful Miele accessories and care products are available for your appliance. Active AirClean filters See “Accessories supplied” for a description. Water filter (Bypass/Active charcoal filter) The water filter filters supply water for making ice cubes. The appliance is supplied with a water filter (Active charcoal filter) that filters supply water for making ice cubes.
Before first use Before first use Allow the appliance to stand for approx. 1 hour prior to connecting it to the power supply. This will help prevent any malfunctions. Packaging material Remove all packaging material from the inside of the appliance. Leftover tape residue. Always remove all packaging material, including adhesive tape, before switching on the appliance. Cleaning Please refer to the relevant instructions in “Cleaning and care”. Clean the inside of the appliance and the accessories.
Before first use Remove the label from the foil and stick it onto the frame of the dry compartment (see “Product description”). Tip: If you are not satisfied with the positioning of the labels, you can easily pull them off and stick them on again. In addition, they can be removed without leaving any residue. Inserting the Active AirClean filters Your refrigeration appliance is equipped with 2 Active AirClean filters which neutralize unpleasant odors in the Fridge Zone.
Before first use Using the appliance The touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react. Select if you wish to switch to the previous menu level or terminate the process. Every touch of the display is confirmed with an audible keypad tone. You can switch off this keypad tone in settings mode . Starting up for the first time Open the appliance door.
Before first use Select Continue if you wish to set up Miele@home now (to do this, following the instructions under “Selecting additional settings”, section “Set up Miele@home”). Select Skip if you would prefer to set up Miele@home later. Use the and arrow buttons to select the correct setting and touch OK to confirm your selection. Select if you want to return to the previous menu level. Set-up Successfully Completed appears in the display. Confirm the first use with OK.
Switching on and off As soon as the selected freezer temperature has been reached, the message will disappear completely from the display and the alarm tone will stop. Switching on the appliance Open the appliance door. To enable the temperature to get sufficiently cold inside the appliance, allow the appliance to run for a few hours before placing food in it. Do not place food in the Freezer Zone until it has reached the required coldness (at least 0°F/-18°C).
Switching on and off Turning off for longer periods of time If the appliance is not going to be used for a longer period of time: turn the appliance off, unplug the appliance or disconnect the fuse, close the shut-off valve in the water supply line (approx.
Selecting additional settings In settings mode , certain settings can be adjusted and functions selected, allowing you to adjust the machine to suit your requirements. The following section only describe the functions in settings mode that require further explanation. The door alarm and other warnings are automatically disabled when the appliance is in settings mode .
Selecting additional settings Health risk caused by decom- Performing a Self Test posing food. The usability and quality of food in the Freezer Zone may deteriorate if the temperature remains above 0°F (-18°C) for an extended period. Only ever switch on the Eco Mode function for a limited period. When switching to Eco Mode, check that the food in the Freezer Zone is already properly frozen. Do not freeze any new food while the Eco Mode function is switched on.
Selecting additional settings The main screen appears on the display again. Switching on Door Assistant You can choose between the two Door Assistants Push2Open and Pull2Open. The default Door Assistant is Push2Open. The Push2Open Door Assistant is suitable for cabinet fronts without handles. The door will then open automatically when you gently press against it. The Pull2Open Door Assistant is suitable for cabinet fronts with handles. The appliance door can be opened easily with little force.
Selecting additional settings Touch the sensor control to return to the previous menu level. - Adjusting the intensity You can also adjust the intensity of the Push2Open function. The lower the intensity, the less force required when pushing against the door. In settings mode , use the and arrow buttons to select Door Assistant and select OK to confirm your selection. In settings mode , use the and arrow buttons to select Intensity and select OK to confirm your selection.
Selecting additional settings Switching off Door Assistant In settings mode , use the and arrow buttons to select Door Assistant and select OK to confirm your selection. Use the and arrow buttons to select Mode and touch OK to confirm your selection. Use the and arrow buttons to select Off and touch OK to confirm your selection. Touch the sensor control to return to the previous menu level. Setting up Miele@home Your appliance is equipped with an integrated WiFi module.
Selecting additional settings Miele@mobile app The Miele@mobile app is available to download free of charge from the Apple ® App Store or from the Google Play™ Store. Connecting your appliance via the Miele@mobile app You will also require the following to log in: – the password to your WiFi network – the password to your appliance Your appliance's password is its serial number, which can be found on the data plate.
Selecting additional settings As soon as your appliance has been integrated into your WiFi network, the message Connection successful appears in your appliance's display. Connecting your appliance via WPS Confirm the process with OK again. In settings mode , use the and arrow buttons to select Miele@home and select OK to confirm your selection. If the WiFi connection is active, will appear in the display. Your router must be equipped with the WPS function for this connection option.
Selecting additional settings Deactivating Miele@home In settings mode , use the and arrow buttons to select Miele@home and touch OK to confirm your selection. Use the and arrow buttons to select Deactivate and touch OK to confirm your selection. Deactivation successful appears in the display. Confirm the message with OK. Your appliance is now disconnected from your WiFi network. The symbol will go out in the display.
Selecting additional settings Setting up Miele@home again If you have changed your WiFi network, you can set up Miele@home again for your appliance. In settings mode , use the and arrow buttons to select Miele@home and select OK to confirm your selection. Use the and arrow buttons to select Set up again and touch OK to confirm your selection. Reset configuration? appears on the dis- play. Use the and arrow buttons to select Yes or No and touch OK to confirm your selection.
Selecting additional settings Resetting the settings to their default settings You can reset the appliance's settings to their default settings. In settings mode , use the and arrow buttons to select Factory Default and select OK to confirm your selection. Use the and arrow buttons to select Reset and touch OK to confirm your selection. After a brief delay, Settings Reset appears in the display. Confirm the message with OK.
Selecting additional settings Tempera- 37°F (4°C) ture in the Fridge Zone Tempera- 32°F (0°C) ture in the dry compartment Temperature in the Freezer Zone 0°F (-18°C) Switching Vacation mode on or off Tip: Vacation is useful when going on vacation, for example, if you do not wish to switch off the Fridge Zone completely or do not need a high degree of cooling.
Selecting additional settings Health risk caused by decom- Turning on Vacation mode posing food. The usability and quality of food in the Fridge Zone may deteriorate if the temperature remains above 37°F (4°C) for an extended period. Only ever switch on the Vacation function for a limited period. Do not store any temperature-sensitive food which goes off easily such as fruit, vegetables, fish, meat, and dairy products during this time.
Selecting additional settings Switching Sabbath Mode On/ – The Automatic SuperCool function (if previously switched on) Off The appliance offers a Sabbath Mode for the purposes of religious observance. If Sabbath Mode is switched on, appears in the display. When Sabbath Mode is switched on, you cannot make any settings on your appliance. Ensure that the appliance door is properly closed, as visual and audible alarms are switched off in Sabbath mode.
Selecting additional settings Switching on, switching off or resetting Water Filter Display Depending on the quantity of ice cubes produced, the Water Filter Display will remind you approximately every 6 months that the water filter has to be replaced (see “Water filter”, section “Changing the water filter”). New water filters (Bypass and Active charcoal filters) are available from Miele, from your dealer, or via the internet.
Selecting additional settings The Water Filter Display has been switched off. Resetting Water Filter Display After replacing the water filter (see “Water filter”, section “Changing the water filter”), you will have to reset the Water Filter Display. In settings mode , use the and arrow buttons to select Water Filter Display and select OK to confirm your selection. Use the and arrow buttons to select Reset and touch OK to confirm your selection.
Selecting additional settings Switching on the Display Active AirClean Filter If the Display Active AirClean Filter has been switched off once, it must be switched on again if required. In settings mode , use the and arrow buttons to select Display Active AirClean Filter and select OK to confirm your selection. Use the and arrow buttons to select Reset and touch OK to confirm your selection. The Change Active AirClean Filter message disappears from the display.
The correct temperature It is very important to set the correct temperature for storing food in the appliance. Bacteria will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these bacteria. Reducing the temperature reduces their growth rate.
The correct temperature Setting the temperature Temperature range Touch the symbol for setting the temperature. The temperature can be adjusted: The previously set temperatures of the Fridge and Freezer Zones are displayed. Use the and arrow buttons to select the temperature zone for which you want to adjust the temperature and touch OK to confirm your selection. Set the temperature you want with the and sensor controls.
Using Automatic SuperCool and SuperFreeze SuperCool function Switching off SuperCool The SuperCool function can be used to rapidly reduce the temperature in the Fridge Zone to its lowest setting (depending on the room temperature). Touch the symbol in the display for setting the temperature. SuperCool is particularly recommended for the rapid chilling of large amounts of fresh food or drink. Switching on SuperCool Touch the symbol in the display for setting the temperature.
Using Automatic SuperCool and SuperFreeze SuperFrost function Turning off SuperFrost For best results, turn on the SuperFrost function before putting fresh food into the freezer. Touch the symbol for setting the temperature. Fresh food will be frozen quickly, so that the nutritional value, vitamin content, appearance, and taste are maintained. Exceptions: – Placing food in the freezer that is already frozen. – When freezing up to 4.4 lb (2 kg) kg fresh food daily.
Temperature and door alarm The appliance has been fitted with a warning system which ensures that the temperature in the freezer cannot rise unnoticed and to avoid energy being wasted if the door is left open. Temperature alarm The Freezer temperature too high. Max. temperature °C message appears in the display if the temperature in the Freezer Zone becomes too warm. An alarm will also sound. The temperature display will show the highest temperature that was reached during the time the temperature rose.
Temperature and door alarm Door alarm An alarm will sound if the appliance doors have been left open for longer than 2 minutes. The Close the door message also appears in the display. As soon as the doors are closed, the alarm will stop and the message in the display will go out. Turning the door alarm off early If the alarm disturbs you, it can be turned off early. Touch the OK sensor control in the display. The alarm stops and the message disappears from the display.
Adjusting the interior fittings Moving the shelves in the appliance door Danger of injury! Only move the shelves in the door when they are empty. Moving the adjustable shelves If necessary, the adjustable shelves can be removed or their height can be adjusted: The shelves can be moved when loading and unloading and for cleaning or they can be removed completely: Hold the shelf on both sides and raise it slightly so that it can be lifted with the catches over the guide at the back.
Adjusting the interior fittings Removing the hanging drawer The hanging drawer can be moved to the left or right if required. To clean the hanging drawer, remove it as follows: Removing compartments from the Fridge Zone The compartments in the Fridge Zone are on telescopic runners, and can be removed for filling, emptying, or cleaning purposes: Pull the compartment out a little bit. Pull the hanging drawer straight out to lift it over the pull-out stops.
Adjusting the interior fittings Removing the freezer baskets The freezer baskets can also be removed if necessary (e.g., for cleaning). Open the lower appliance door as wide as possible. Pull the freezer basket out as far as it will go. Raise the snap fastening on both sides, unclip, and carefully lift the basket out. To replace it, pull the telescopic runners out as far as they will go. Place the freezer basket back in again.
Adjusting the interior fittings Removing the ice cube tray The ice cube tray can be removed for cleaning: Open the lower appliance door as wide as possible. Tilt the ice cube tray forwards and pull it up and out to remove it. Ice cube production does not stop when the ice cube tray has been removed. Ice cubes can fall into the freezer basket underneath.
Storing food in the refrigerator section Always observe USDA food safety guidelines. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Risk of explosion due to flammable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store any explosive materials or products containing flammable propellants (e.g., spray cans) in the appliance.
Storing food in the refrigerator section Warmest area The warmest area in the refrigerator section is in the top section of the door. Use this for storing butter so that it remains spreadable and cheese so that it retains its flavor. Coldest area The coldest area in the refrigerator section is inside the appliance at the back. The temperature in the dry compartment of the MasterFresh zone is even colder.
Storing food in the refrigerator section Notes on buying food The freshness of food when first placed in the appliance is an important factor in determining how long it stays fresh, and how long it can be kept in the appliance. Take into account the use-by date and the correct storage temperature. Time out of the refrigerator, e.g., transporting food in a warm car, should be kept to a minimum. Tip: Take a cool bag when shopping, and load food in the appliance as soon as possible.
Storing food in the MasterFresh zone MasterFresh zone The MasterFresh zone provides ideal storage conditions for fruit, vegetables, fish, meat, and dairy products. Food stays fresh considerably longer while retaining both flavor, and vitamins. The MasterFresh zone comprises a humidity-controlled and a dry compartment. – Depending on the moisture-regulator setting, the humidity-controlled compartment is particularly suitable for storing fruit and vegetables.
Storing food in the MasterFresh zone Increased moisture in the humiditycontrolled compartment can, in some circumstances, cause a buildup of condensate. This should be removed with a cloth. Slide control at = moisture increased slightly We recommend this setting if you store very large quantities of fruits and vegetables in the humidity-controlled compartment. The slide control partially closes the vents in the compartment so that some of the moisture present is retained.
Storing food in the MasterFresh zone Dry compartment with low temperature The temperature in the dry compartment is maintained at 30 to 37°F (-1 to 3°C). While lower than the temperature in a standard refrigerator, this is the optimum temperature range for storing fresh food which is not sensitive to cold. The deterioration process is decelerated at this temperature range so food can be stored without loss of freshness for considerably longer than in a standard refrigerator.
Storing food in the MasterFresh zone The following tips may help if you find that food you have stored does not keep well (for example, the food wilts or becomes withered after only a short storage time): Only place fresh food in the appliance as the initial condition of the food is crucial to maintaining freshness. Clean the MasterFresh zone before storing food in it. Very wet food should be dried off before storing it in the humidity-controlled compartment.
Freezing and storing food Always observe USDA food safety guidelines. reabsorb it during the defrosting process, and very little water collects around the defrosted food. Risk of fire from electrical appli- Storing frozen food ances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance.
Freezing and storing food Home freezing Only freeze food that is fresh and in good condition. Tips for home freezing – The following types of food are suitable for home freezing: fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, baked goods, leftovers, egg yolks, egg whites, and a range of precooked meals. – The following types of food are not suitable for freezing: lettuce, radishes, sour cream, mayonnaise, whole eggs in their shells, onions, whole raw apples and pears.
Freezing and storing food Before placing food in the freezer When freezing more than 4.4 lb (2 kg) of fresh food, switch on the SuperFrost function some time before placing the food in the freezer (see “SuperFrost”). This helps food which is already stored in the freezer to stay frozen. Placing food in the Freezer Zone Food to be frozen can be placed anywhere in the Freezer Zone. Place large quantities of food in the large freezer basket.
Freezing and storing food Defrosting frozen goods Never re-freeze partially or fully defrosted food. Defrosted food may only be re-frozen after it has been cooked. Frozen food can be defrosted in different ways: – In a microwave – In an oven using “Convection” or the “Defrost” setting – At room temperature – In the Fridge Zone (the cold given off by the frozen food helps to keep the other food cold) – In a steam oven Flat pieces of partially thawed meat or fish can be placed directly into a hot skillet.
Making ice cubes For the automatic ice maker to operate, it must be connected to a water supply (see “Water connection”). CAUTION The first three batches of ice cubes made after the ice maker is started up must not be consumed, as the water will have been used for the initial rinse through the water supply line. This applies to the initial commissioning as well as when using the appliance again after it has been turned off for a long while.
Making ice cubes Switching off Ice Maker The Ice Maker can be turned off independently of the Freezer Zone if you do not want to make any ice cubes. Close the shut-off valve in the water supply line (approx. 3 hours before switching off the appliance to avoid the build-up of bacteria caused by stagnant water). In settings mode , use the and arrow buttons to select Ice Maker and select OK to confirm your selection. Use the and arrow buttons to select Off and touch OK to confirm your selection.
Automatic defrosting WARNING! DANGER of injury Freezer Zone and damage! Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. The appliance is equipped with a “NoFrost” system. The freezer defrosts automatically. Refrigerator section and MasterFresh drawer The refrigerator section and the MasterFresh drawer defrost automatically.
Cleaning and care WARNING! DANGER of electric Cleaning agents shock! Unplug the appliance or trip the circuit breaker. To avoid damaging the surfaces of your appliance, do not use WARNING! Fire hazard! Do not damage the coolant pipework. Do not let water get into the electronic unit or the lighting. Do not use a steam cleaner. Steam from a steam cleaning appliance could reach the electrical components and cause a short circuit. The data plate located inside the appliance must not be removed.
Cleaning and care Before cleaning the appliance Turn the appliance off completely by pressing the On/Off switch. Unplug the appliance or switch off the fuse. Take any food out of the appliance and store it in a cool place. Take out all other removable parts for cleaning (see “Adjusting the interior fittings”). Interior and accessories Clean the appliance regularly, or at least once a month. Clean up any spills, stains, or food immediately. Do not allow them to dry and stick to the appliance.
Cleaning and care Appliance front The appliance front has a special highquality finish (Clean Touch Steel). This is resistant to soiling and is very easy to clean. Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steel conditioning agent on these surfaces, as it will cause noticeable smearing. If soiling is allowed to sit for any length of time, it may become impossible to remove. Surfaces may be discolored or altered.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently Asked Questions Problem Possible cause and solution The compressor is switching on more frequently and for longer periods of time, so the temperature in the appliance is dropping. The ventilation slits in the cabinetry have been covered or become too dusty. Do not block the ventilation slits. Clean the ventilation slits on a regular basis. The doors have been opened too frequently, or a large amount of fresh food has been put in at once for storage or freezing.
Frequently Asked Questions Problem Possible cause and solution The compressor comes on less and less often and for shorter periods of time. The temperature in the appliance rises. This is not a fault. The temperature setting is too high. Correct the temperature setting. Check the temperature again after 24 hours. The compressor runs continuously. Not a fault. To save energy, the compressor runs at a lower speed when less cooling is required. This increases the compressor run time.
Frequently Asked Questions Problem Possible cause and solution The storage life of the food stored in the dry compartment of the MasterFresh zone is reduced. The temperature in the dry compartment of the MasterFresh zone is possibly too high. The temperature in the dry compartment is controlled by the set temperature in the Fridge Zone. Lower the temperature in the Fridge Zone (see “Setting the temperature” in “The correct temperature”).
Frequently Asked Questions Messages in the display Message Possible cause and solution The warning sounds The temperature in the appliance has risen signifiand the message Freezer cantly. temperature too high. Max. This could be due to, for example: temperature °F appears in – the appliance door being opened too often, or bethe display.
Frequently Asked Questions Message Possible cause and solution “F Please contact Miele Technical Service.” appears in the display and an alarm sounds. There is a fault. Make a note of the fault message if necessary. Contact Technical Service. To turn the alarm off, touch the symbol. The error message does not disappear from the display until the error has been rectified. The voltage level is too high/low. Observe the connection data under “Electrical connections”.
Frequently Asked Questions Problems with the ice cube maker Problem Possible cause and solution The Ice Maker is not producing any ice cubes. The appliance and/or the Ice Maker is not turned on. Turn on the appliance and/or the Ice Maker. Check whether the water filter has been inserted correctly (see “Water filter”, section “Changing the water filter”). The plumbed water connection was not installed. Make sure that the plumbed water connection was installed correctly.
Frequently Asked Questions Problem Possible cause and solution The Ice Maker is producing only small ice cubes. Several household appliances connected to the plumbed water connection are in operation, which has reduced the amount of water being taken in. Avoid using the dishwasher, washing machine, etc. at the same time. The water filter is clogged. Check whether the water filter needs to be changed (see “Water filter”). The water pressure is too low.
Frequently Asked Questions Problem Possible cause and solution Water is flowing out of the appliance. The water intake is faulty. Close the water shut-off valve immediately! Check the water line for damage. Contact Miele Technical Service. Check whether the water pressure is too high Too high water pressure can cause leakages. Check that the water pressure is between 29 and 116 psi (2 and 8 bar). Check if an incorrect valve has been installed.
Frequently Asked Questions The interior lighting is not working. Problem Possible cause and solution The interior lighting is not working. The appliance has not been turned on. Turn the appliance on. Sabbath Mode is switched on: The temperature display is dark and is shown in the display. You can switch off Sabbath Mode at any time via Settings mode . There is a fault. Risk of electric shock! There are live electrical components under the lighting cover.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. Click... Clicking sounds occur whenever the thermostat switches the motor on or off. Sssrrrrr... You can sometimes just hear the sound of the fan inside the appliance. Crack...
Water filter The appliance is supplied with a water filter (OdorFree charcoal filter) that filters supply water for making ice cubes. The OdorFree charcoal filter improves the taste and smell of the ice cubes by removing chlorine and other substances from supply water. To ensure the quality of the ice cubes remains high, it is essential to change the water filter regularly. Please note: – After inserting a new water filter, dispose of all ice cubes produced in the next 24 hours following the change.
Water filter Changing the water filter Air in the system can cause water to gush out and the filter to spring out when it is removed. Take great care when changing the water filter. Tip: The old water filter can be disposed of with household trash. Slide the new water filter as far as it will go into the filter opening 5.), making sure the cap is horizontal. Turn the cap of the water filter counter-clockwise as far as the marker 1.). Pull the used water filter out of the filter opening 2.).
Water filter Now reset the Water Filter Display using Settings mode in the display (see “Selecting additional settings”, section “Resetting Water Filter Display”). When it is time to change the water filter again, the reminder for the Water Filter Display will appear in the display. After inserting a new water filter, dispose of all ice cubes produced in the next 24 hours following the change.
Water filter Water filter Performance Data Sheet Model: Miele 07134220 Use Replacement Cartridge 07134220 The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53. System tested and certified by NSF International against NSF/ANSI Standard 42 and Standard 53 for the reduction of the claims specified on the Performance Data Sheet.
Water filter Lead-free certificate Lead free certificate This product is tested and certified by WQA against NSF/ANSI 372 for “lead free” This product F 1413 Vi (KIMSDF18US) is tested and certified by WQA against compliance. NSF/ANSI 372 for "lead free" compliance. Miele & Cie. KG Carl-Miele-Strasse 29 D-33332 Gütersloh Miele & Cie.
Technical Service Contact in case of fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Technical Service. Contact information for Miele Technical Service can be found at the end of this document. Please quote the model and serial number of your appliance when contacting Miele. Both pieces of information can be found on the data plate. You will find the data plate inside your appliance.
Declaration of conformity Frequency band 2,412 GHz – 2,462 GHz Maximum transmitting power < 100 mW 120
Copyright and licenses Miele uses software to operate and control the appliance. The copyright authorization from Miele and other relevant software suppliers must be respected. Miele and its suppliers reserve the rights to the software components.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
KF 2801 SF, KF 2811 SF, KF 2901 SF, KF 2911 SF en-US, CA M.-Nr.