Installation plan Heat-pump dryer PDR 908 HP Always read the operating and installation instructions before setting up, installing, and commissioning the machine. This prevents both personal injury and damage to the machine.
Please have the model and serial number of your machine available when contacting Technical Service. Canada Importer Miele Limited Professional Division 161 Four Valley Drive Vaughan, ON L4K 4V8 Phone: 1-888-325-3957 www.mieleprofessional.ca professional@miele.ca Miele Professional Technical Service Phone: 1-888-325-3957 serviceprofessional@miele.ca Manufacturer: Miele & Cie.
PDR 908 HP en-CA Machine dimensions * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-CA Installation * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-CA Washer-dryer stack * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-CA Installation * The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-CA Technical data PDR 908 HP Heat pump Drying system Drum volume l 130 (4.59 ft3) Capacity kg 8.0 (17.6 lb) Door opening diameter mm 370 (17 9/16 in) Electrical connection (EL) Standard voltage CDN & USA 2 AC 208–240 V Frequency Hz 60 Total rated load kW 1.2 Fuse rating A 2 x 30 Supply cable min. cross-section 3 x AWG10 Supply cable with plug type NEMA L6–30P Length of supply cable mm Non-standard voltage MAR 208–240 (Marine) 2,100 (6.
PDR 908 HP en-CA Technical data PDR 908 HP Machine data Overall machine dimensions (H/W/D) mm 850/605/777 (33 7/16 / 23 13/16 / 30 9/16 in) Casing dimensions (H/W/D) mm 850/596/737 (33 7/16 / 23 7/16 / 29 in) mm 900/605 (35 7/16 / 23 13/16 in) Side gap mm 20 (13/16 in) Recommended side gap – washer-dryer stack mm 300 (11 13/16 in) Recommended distance to opposite wall from front of machine mm 1,000 (39 3/8 in) Machine weight (net weight) kg 73 (161 lb) Max.
PDR 908 HP en-CA Installation and planning notes Installation requirements Drainage options: The tumble dryer should only be connected to a power supply provided in accordance with all appropriate local and national legislation and regulations. 1. Direct connection to a plastic drain pipe with a rubber sleeve. Use a non-return valve if the end of the hose could possibly become submerged in water.
PDR 908 HP en-CA Installation and anchoring The machine must be installed on a perfectly smooth, level and firm surface which is able to withstand the quoted loads. The floor load created by the machine is concentrated and transferred to the installation footprint via the machine feet. The tumble dryer should be levelled in both directions with the aid of the adjustable feet.
