Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
100
WiFi / LAN
For the use of WiFi/LAN additional
Miele digital products are necessary.
The ability of Miele digital products
depends on the availability of the
services in your country.
The different services are not available
in all countries.
For information about availability,
please visit www.miele.com.
Control the networking of your tumble
dryer.
- Setup
This message only appears if the
tumble dryer has not yet been
connected to a WiFi network.
- Deactivate (visible when the network
is activated)
The network remains set up; the WiFi
function is switched off.
- Activate (visible when the network is
deactivated)
The WiFi function is reactivated.
- Connection status (visible when the
network is activated)
The following values are displayed:
– The quality of WiFi reception
– The network name
– The IP address
- Reset (visible when set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
- Reset (visible if already set up)
The network is no longer set up. A
new connection has to be
established in order to use the
network again.
– The WiFi is switched off
– The WiFi connection will be reset
to the factory default setting