Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Frequently Asked Questions
Message Possible cause and solution
Rinse the lint filter
and plinth filter.
Check the airways.
You have attempted to dry only a few items of
varying size.
A smaller item has been sucked into the loading area
in the door. It is clogging the holes in the laundry
deflector.
To delete the message: touch the OKsensor
control.
Open the tumble-dryer door.
Remove the item that is blocking the holes.
Always dry small, individual items together with
larger items.
If you are able to exclude all this, the system has
been clogged by lint or detergent residue.
The system has been clogged by lint or detergent
residue.
Clean all lint filters and air channels.
Check whether the lint filters in the loading area
and toe-kick are free from damage and in good
working order.
If you have removed the plinth filter, also check the
filter insert behind it. Clean the filter insert if
necessary.
If you have removed the filter insert, also check the
heat exchanger behind it. Clean the heat
exchanger if necessary.
Please see “Cleaning and care” for notes on
cleaning. Lint filters that are damaged, misshapen, or
can no longer be cleaned must be replaced with new
ones.
To delete the message: touch the OKsensor
control.
66