Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Frequently Asked Questions
72
Reactivating the plinth filter
You can reactivate one or more dirty
plinth filters in the washing machine.
You will then be able to use the plinth
filter again for a reasonable period of
time.
Wash the plinth filter(s) separately,
not with any laundry items. Do not
add any detergent.
Tip: Select a short wash program with a
maximum temperature of 104°F (40°C)
and a maximum spin speed of 600rpm.
Select the Separate Rinse program,
for example.
You can re-insert the plinth filter once
the wash and spin cycle is complete.
You can continue to use a reactivated
plinth filter provided that it does not
show any signs of wear.
You must stop using a reactivated
plinth filter if it shows signs of wear
or deformation.
Please see “Cleaning and care –
Replacing the plinth filter” for details.