Installation plan Heat pump tumble dryer PDR 908 HP It is essential to read the operating and installation instructions before installation and commissioning. This prevents both personal injury and damage to the appliance.
Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Melbourne: 1 Gilbert Park Drive Knoxfield, VIC 3180 Telephone: 1300 731 411 service.prof@miele.com.au www.miele-professional.com.au sales@miele-professional.com.au Miele New Zealand Limited IRD 98 463 631 Level 2, 10 College Hill Freemans Bay Auckland 1011 New Zealand Telephone: 0800 4 MIELE (0800 464 353) www.miele-professional.com.au sales@miele-professional.com.
PDR 908 HP en-AU, NZ Appliance dimensions F SLA F F F F KGA EL XKM F ASK F F PA 11 276 500/01 3
PDR 908 HP en-AU, NZ Installation ASK EL KG EL ASK KG KGA SLA ASK EL KG EL ASK KG KGA SLA UO/ UG 4 11 276 500/01
PDR 908 HP en-AU, NZ Installation F F F EL EL F KGA SLA ASK PA APCL ASK APCL 11 276 500/01 5
PDR 908 HP en-AU, NZ Installation 6 11 276 500/01
PDR 908 HP en-AU, NZ Technical data PDR 908 HP Heat pump Drying system Drum volume l 130 Load capacity kg 8.0 Door opening diameter mm 370 Electrical connection (EL) Standard voltage (AU, NZ) 1N AC 230 V Frequency Hz 50 Total rated load kW 1.44 Fuse rating A 1 x 10 Supply cable min. cross-section mm² 3 x 1.0 Supply cable with plug Length of supply cable mm Non-standard voltage MAR 230 (Marine) 2000 1N AC 230 V Frequency Hz 60 Total rated load kW 1.
PDR 908 HP en-AU, NZ Technical data PDR 908 HP Appliance data Overall appliance dimensions (H/W/D) mm 850/605/777 Casing dimensions (H/W/D) mm 850/596/737 mm 900/605 Min. side gap mm 20 Recommended side gap – washer-dryer stack mm 300 Min. distance to opposite wall from appliance front mm 950 Recommended distance to opposite wall from appliance front mm 1100 Appliance weight (net weight) kg 73 Max.
PDR 908 HP en-AU, NZ Installation and planning notes Installation requirements Drainage options: The tumble dryer should only be connected to a power supply provided in accordance with all applicable local and national legislation and regulations. 1. Connected securely to a trapped waste pipe. Use a non-return valve if the end of the hose could possibly become submerged in water.
PDR 908 HP en-AU, NZ Installation and anchoring The machine must be installed on a perfectly smooth, level and firm surface which is able to withstand the quoted loads. The floor load created by the machine is concentrated and transferred to the installation footprint via the machine feet. The tumble dryer should be levelled in both directions with the aid of the adjustable feet.