Installation Plan Heat-Pump Dryer PDR 908 HP Always read the operating and installation instructions before setting up, installing, and commissioning the machine. This prevents both personal injury and damage to the machine.
Please have the model and serial number of your machine available when contacting Technical Service. U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 www.mieleusa.com/professional prosales@mieleusa.com Technical Service & Support Phone: 800-991-9380 proservice@mieleusa.com Miele & Cie.
PDR 908 HP en-US Machine dimensions -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Installation -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Washer-dryer stack -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Installation -measurements in inches* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Machine dimensions -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Installation -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Washer-dryer stack -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP en-US Installation -measurements in millimeters* The distances between the machine and the wall are recommendations to help make it easier to carry out service work. If installation space is limited, the machine can also be pushed up against the wall.
PDR 908 HP Technical data Drying system en-US PDR 908 HP Heat pump Drum volume 34.3 gal Capacity 17.6 lb Door opening diameter 14 9/16" PDR 908 HP Heat pump 130 l 8.0 kg 370 mm Electrical connection (EL) Standard voltage CND & USA 2 AC 208–240 V 2 AC 208–240 V Frequency 60 Hz 60 Hz Total rated load 1.2 kW 1.2 kW Fuse rating Wire min.
PDR 908 HP Technical data en-US PDR 908 HP PDR 908 HP Machine data Overall machine dimensions (H/W/D) Casing dimensions (H/W/D) 33 7/16" / 23 13/16" / 30 9/16" 850/605/777 mm 33 7/16" / 23 7/16" / 29" 850/596/737 mm 35 7/16" / 23 13/16" 900/605 mm Site-access dimensions (H/W) Min. site-access opening (excl.
PDR 908 HP en-US Installation and planning notes Installation requirements Drainage options: The tumble dryer should only be connected to a power supply provided in accordance with all appropriate local and national legislation and regulations. 1. Direct connection to a plastic drain pipe with a rubber sleeve. Use a non-return valve if the end of the hose could possibly become submerged in water.
PDR 908 HP en-US Installation and anchoring The machine must be installed on a perfectly smooth, level, and firm surface which is able to withstand the quoted loads. The floor load created by the machine is concentrated and transferred to the installation footprint via the machine feet. The tumble dryer should be leveled in both directions with the aid of the adjustable feet.