Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
104
Debounce time
In coin-box mode, the debounce time
for the minimum payment signal that
must be applied can be adjusted.
– Factory default: Short
For coin boxes where the falling coin
generates the paid pulse.
– Long
For central control units on a 230V
basis.
Pay system override time
Setting the transition signal for the
coin box. Security time margin to
prevent the coin box being tampered
with.
The override time can be set or
switched off in increments of one
minute from 30minutes up to 4hours.
If the program does not end within the
transition period, the setting in the coin
box is reset. The program is canceled.
Factory default: 3hours
Duration Cool air
The running time can be adjusted.
A time of between 10minutes and
2hours can be set in five-minute
intervals.
Factory default: 2hours
Duration Warm air
The running time can be adjusted.
A time of between 20minutes and
2hours can be set in five-minute
intervals.
Factory default: 2hours
FOC programs
In coin-box mode, you can decide
whether the Timed drying cool air
program can be used for free.
– Factory default: Off
– On