Operating and Installation Instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Cleaning and care
60
Checking the cooling fins on the heat
exchanger
Danger of injury caused by
touching the cooling fins.
You could cut yourself.
Do not touch the cooling fins with
your hands.
After removing the filter insert, visually
check the cooling fins on the heat
exchanger. Check for any accumulation
of lint.
If you notice any visible soiling,
carefully vacuum it up with a vacuum
cleaner. Use a dusting brush or the
narrow crevice nozzle.
Risk of damage if cooling fins are
cleaned incorrectly.
The cooling fins can suffer damage
or distortion. This could hinder the
operational performance of the
tumble dryer.
Clean using a vacuum cleaner with a
dusting brush attached. Only pass
the vacuum cleaner dusting brush
over the heat-exchanger fins lightly,
without applying any pressure.