Operating & Installation Guide
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Cleaning and care
50
2. When to clean the filter in the toe-
kick
The filter in the toe-kick is behind the
lint-filter flap on the bottom left.
With normal use
Clean the filter when this prompt
appears in the display: Clean out the
airways.
With continuous use
Clean once a day and also when the
prompt appears in the display.
The surface of the filter in the filter
insert is visible after removing the lint
filter. This filter surface also has to be
cleaned.
To delete the message: Touch the
OKsensor control.
Damage caused by insufficient
cleaning or by operation with a worn,
damaged filter in the toe-kick.
There is insufficient flow of air and
heat in the heat exchanger due to
clogging. This requires a visit from
the Technical Service department.
This can be avoided by following the
advice in these operating
instructions.