Operating & Installation Guide
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Initial commissioning
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a program
- 4. Selecting program settings
- 5. Starting a program
- 6. End of program – removing the laundry
- Timer
- Program chart
- Changing the program sequence
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Supervisor level
Supervisor level
95
Special programs
You can put together 5 special
residual-moisture or time-controlled
programs and assign your own
program names.
First, enter the program name.
Select the special program you want
to change.
The Save asmenu opens.
Use the letters and symbols below
the line to enter the name.
Touch the Savesensor control.
You can now enter the parameters for
aRes. moisture
programorTimed drying.
The 5 special programs are pre-
programmed at the factory. You can
change these special programs.
The special programs are added to the
program packages. Enter the name
and settings of your special program
into the “Special programs” table in
the “Program overview” chapter.
Res. moisture program
– Final residual moisture:
-6%(dry) – 40%(damp)
– Extra drying time:
0–60minutes
– Temperature(Process air):
cold – 158°F (70°C)
– Drum rotation main direction:
0–600seconds
– Drum reversal:
0–600seconds
– Holding phase
– Holding time:
0–60minutes
– Holding temperature(Process air):
cold – 158°F (70°C)
– Cooling down temp.(Process air):
104-131°F (40–55°C)
– Anti-crease
– Drum rotation main direction:
0–500seconds
– Drum reversal:
0–500seconds
– Pause:
100–3000seconds
Timed drying
– Running time:
1–120minutes
– Temperature(Process air):
cold – 158°F (70°C)
– Drum rotation main direction:
0–600seconds
– Drum reversal:
0–600seconds