Installation Plan

PDR 908 HP en-US
10 11 278 880/03
Installation and anchoring
The machine must be installed on a perfectly smooth, level, and firm
surface which is able to withstand the quoted loads.
The floor load created by the machine is concentrated and transferred
to the installation footprint via the machine feet.
The tumble dryer should be leveled in both directions with the aid of
the adjustable feet.
Plinth installation
The tumble dryer can be installed on a machine plinth (open or box
plinth, available as an optional Miele accessory) or on a concrete
plinth to be provided on site.
The quality of the concrete and its strength must be assessed
according to the machine load. Ensure that any raised concrete plinth
is adequately bonded to the floor below.
Washer-dryer stack
The tumble dryer can be installed as a washer-dryer stack together
with a Miele Washing Machine. A stacking kit (optional accessory) is
required for this.
Installation of the stacking kit should be performed by Miele Technical
Service or an authorized Miele service technician.