FOREVER BETTER PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 8mieleusa.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER SPECIFICATIONS KFNS 37692 iDE-1 — Item 38376922USA Overall Unit Width 22” (559 mm) Overall Unit Height 6911/16” (1770 mm) Overall Unit Depth 211/2” (545 mm) Niche Minimum Cabinet Opening Width 221/16 ” (560 mm) Minimum Cabinet Opening Height 693/4” (1772 mm) Minimum Cabinet Opening Depth 215/8” (550 mm) Plumbing KFNS 37692 iDE-1 Features: • NEW: Miele PerfectCool Series • FlexiLight - Shelf mounted LED lighting • Right hing
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Installation Dimension For additional information on Plumbing, please refer to the Plumbing section in the Install Manual. For Side-by-Side installations two niche cutouts are required.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Ventilation Dimension - Air intake (1) occurs via the plinth at the bottom of the appliance and the air escapes at the top (2) at the rear of the housing unit. - A ventilation gap of at least 1 5/8” (40 mm) depth must be provided behind the appliance for air to circulate.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Top Ventilation Cross-section (1) Directly above the appliance with a ventilation grill (free airflow of at least 78 3/4”2). (2) In between the housing unit and ceiling. (3) Through a suspended ceiling. - Please refer to manual for further ventilation details.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Bottom Ventilation Slits Dimensions If you would like to use the ventilation slits: - Cut an opening in the plinth (2) as shown in the figure. - Place the ventilation grille (1) inot the opening.
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Custom Panel KFNS 37692 iDE-1 Page 7 of 9 Specification Sheets TRS 10312016
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Custom Panel Continued SPECIFICATIONS Custom Panel Refer to manual for further detail Maximum Panel Weight Top Panel - 44 lbs (20 kg) Bottom Panel - 26 lbs (12 kg) Maximum Panel Thickness 3 Minimum Panel Thickness 5 /4” (19 mm) /8” (16 mm) Inset Panel Minimum Vertical Gap - Between Cabinet 1 /8” (3 mm) and Door Panel Minimum Horizontal Gap - Between Top Cabinet Panel and Door, Between 1/8” (3 mm) Door Panels Framed Cabinet wi
PerfectCool Bottom Mount Refrigerator KFNS 37692 iDE-1 FOREVER BETTER Adjustable Door Hinge 90o or 120o Opening The door hinges are factory set so that the door can be opned wide. However if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommadate this. Insert the limit pins provided into the hinges from above. This will limit the opening angle of the applinace door to 90 o.
