Operating Instructions
Table Of Contents
- Contents
- Notes about these instructions
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Caring for the environment
- Initial commissioning
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program chart
- Cleaning and care
- USER MAINTENANCE INSTRUCTIONS
- Cleaning the wash cabinet
- Cleaning the door and the door seal
- Cleaning the control panel
- Cleaning the reflector panel
- Cleaning the front of the machine
- Cleaning the spray arms
- Checking the filters in the wash cabinet
- Cleaning the filters
- Cleaning the water-inlet filter
- Cleaning the drain pump
- Frequently asked questions
- Miele Service
- INSTALLATION INSTRUCTIONS
- Electrical connection
- Plumbing
- Technical details
- Settings
- Opening the Settings menu
- Changing settings
- Language
- Time of day
- Water hardness
- Rinse Aid
- Temperature unit
- High-temperature final rinse
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Consumption (EcoFeedback)
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Knock2open
- BrilliantLight (depending on model)
- Software version
- Showroom program
- Factory default
- Sound emission tests
Operation
55
Interrupting a program
A program will be interrupted as soon
as the door is opened.
If the door is closed again within 4sec-
onds, the program will continue from
the point it was at before the door was
opened after a few seconds.
4seconds after the door was opened,
the following will appear in the display:
Continue with OK.
Press the OK button and close the door.
The program will continue from the
point at which it was interrupted.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Canceling or changing a pro-
gram
If a program is canceled, important
program stages may be missed.
A program should only be canceled
in the first few minutes.
If a program has already started and
you wish to cancel it, proceed as fol-
lows:
Open the door.
Turn the dishwasher off using the
sensor button.
Confirm the query Turn appliance off
with OK.
If you would like to select another pro-
gram:
If you have dispensed detergent
manually, check whether the deter-
gent compartment is still closed.
If the lid is already open, fill it with de-
tergent again and close the lid.
Turn the dishwasher back on using
the sensor button.
Select the program you want within
4seconds and then start it by shut-
ting the door.
After 4seconds, the following will ap-
pear in the display: Continue with OK.
Press the OK button and close the
door.
The in-operation indicator light comes
on to show that a program has been
started.