Installation Sheet
Table Of Contents
- Contents
- Notes about these instructions
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Caring for the environment
- Initial commissioning
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program chart
- Cleaning and care
- USER MAINTENANCE INSTRUCTIONS
- Cleaning the wash cabinet
- Cleaning the door and the door seal
- Cleaning the control panel
- Cleaning the reflector panel
- Cleaning the front of the machine
- Cleaning the spray arms
- Checking the filters in the wash cabinet
- Cleaning the filters
- Cleaning the water-inlet filter
- Cleaning the drain pump
- Frequently asked questions
- Miele Service
- INSTALLATION INSTRUCTIONS
- Electrical connection
- Plumbing
- Technical details
- Settings
- Opening the Settings menu
- Changing settings
- Language
- Time of day
- Water hardness
- Rinse Aid
- Temperature unit
- High-temperature final rinse
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Consumption (EcoFeedback)
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Knock2open
- BrilliantLight (depending on model)
- Software version
- Showroom program
- Factory default
- Sound emission tests
IMPORTANT SAFETY INSTRUCTIONS
11
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the
door cannot fall open.
- The door locking pins automatically retract when the door opens
at the end of the drying phase.
The control elements of the dishwasher must not be tampered
with.
WARNING - Fire hazard! Do not cover or crush the plug of the ap-
pliance. Ensure that the cabinet opening for the dishwasher provides
ample space for the plug and cord. Installing the dishwasher in a
tight space may crimp the power cord or put pressure on it. See
“Electrical connection”.
Do not use an extension cord to connect this machine to electric-
ity. Extension cords do not guarantee the required safety of the ma-
chine (e.g., danger of overheating).
Do not open the casing of the dishwasher. Any contact with live
connections or tampering with the electrical or mechanical compo-
nents of the dishwasher will endanger your safety and may lead to
machine malfunctions.
The dishwasher must not be used if the wire is damaged. A dam-
aged wire may only be replaced by a suitable wire of the same type.
For safety reasons, such replacement may only be carried out by
Miele Technical Service or a qualified service technician.
Before servicing the appliance, disconnect it from the power sup-
ply.
The plastic housing of the water connection contains electrical
components. It must not be dipped in water.
There are live wires in the water intake hose. Do not shorten the
water intake hose, even if it is too long.