Installation Sheet

Initial commissioning
24
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages Refill salt and
Add rinse aid may appear.
 Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Before using for the first
time”).
 Select OK to confirm the messages.
The program selected will appear briefly
in the display and the appropriate sen-
sor button will be illuminated.
Next, the estimated energy and water
consumption may be shown for the se-
lected program for several seconds.
The display will then show the esti-
mated program duration for the pro-
gram selected.
Miele@home
Your dishwasher is equipped with an
integrated Wi-Fi module.
To use this feature, you will need:
- a Wi-Fi network
- a network solution from Miele, e.g.,
Miele@mobile app
- a Miele user account
You can create a user account using
the network solutions from Miele,
e.g., via the Miele@mobile app.
The relevant network solution will guide
you as you connect your dishwasher to
your home Wi-Fi network.
Once your dishwasher is connected to
your WiFi network, you can use the net-
work solution to carry out the following
tasks:
- Call up information on the operating
status of your dishwasher
- Call up information on the program
sequence of your dishwasher
Connecting your dishwasher to your
Wi-Fi network will increase energy con-
sumption, even when the dishwasher is
turned off.
Make sure that your Wi-Fi network
signal strength is strong enough at
the installation site of your dish-
washer.