Installation Sheet

Operation
51
Turning on the dishwasher
 Turn on the water supply if it is turned
off.
 Open the door.
 Make sure the spray arms can rotate
freely.
 Touch the sensor button.
If the dishwasher has been turned off
for longer than 1minute, you will
need to hold the sensor button for
a bit longer (wipe protection).
The program selected will appear briefly
in the display and the appropriate sen-
sor button will be illuminated.
Next, the estimated water consumption
may be shown for the chosen program
for several seconds.
Then the display will show the esti-
mated duration for the selected pro-
gram.
Selecting a program
Choose your program according to the
type of load and the degree of soiling.
The different programs and their uses
are described in the Program overview
later on in this booklet.
 Touch the sensor button for the re-
quired program.
The sensor button for the selected pro-
gram will light up.
Additional programs can be selected via
the option.
 To do so, touch the sensor button.
The first of the additional programs will
appear in the display.
 Use the sensor buttons in the
display to select the program you
want.
You can now select program options
(see “Program options”).
If any program options are selected, the
appropriate sensor buttons will also
light up.