Installation Sheet

Options
58
Setting “Start at”
With the Start at function, you set the
exact time at which you want the pro-
gram to start.
 Use the sensor buttons to enter
the hour and confirm your entry with
OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the sensor buttons to enter
the minutes and confirm your entry
with OK.
The saved start time for the selected
program will appear in the display for
several minutes.
 Close the door.
When the set time is reached, the pro-
gram selected will begin automatically.
Setting “Finish at”
Use the Finish at function to set the lat-
est time by which the program selected
has to be finished.
 Use the sensor buttons to enter
the hour and confirm your entry with
OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the sensor buttons to enter
the minutes and confirm your entry
with OK.
The estimated start time for the se-
lected program will appear in the dis-
play for several minutes.
A message will appear in the display if
the program cannot be completed by
the set finish time because the cycle
time is too long.
 If it appears, confirm the message
with OK.
 Close the door.
The program will start automatically
when the estimated start time is
reached.