Installation Sheet
Table Of Contents
- Contents
- Notes about these instructions
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Caring for the environment
- Initial commissioning
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program chart
- Cleaning and care
- USER MAINTENANCE INSTRUCTIONS
- Cleaning the wash cabinet
- Cleaning the door and the door seal
- Cleaning the control panel
- Cleaning the reflector panel
- Cleaning the front of the machine
- Cleaning the spray arms
- Checking the filters in the wash cabinet
- Cleaning the filters
- Cleaning the water-inlet filter
- Cleaning the drain pump
- Frequently asked questions
- Miele Service
- INSTALLATION INSTRUCTIONS
- Electrical connection
- Plumbing
- Technical details
- Settings
- Opening the Settings menu
- Changing settings
- Language
- Time of day
- Water hardness
- Rinse Aid
- Temperature unit
- High-temperature final rinse
- Miele@home
- Remote control
- RemoteUpdate
- SmartStart
- EcoStart
- Consumption (EcoFeedback)
- Display brightness
- Volume
- Refill reminders
- AutoOpen
- Knock2open
- BrilliantLight (depending on model)
- Software version
- Showroom program
- Factory default
- Sound emission tests
Frequently asked questions
78
Water intake fault
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
messages appears in
the display:
Open water supply
The water supply faucet is turned off.
Open the water-supply faucet all the way.
Intake
Before remedying the fault:
Turn off the dishwasher.
Water-inlet fault.
Open the water-supply faucet all the way and start
the program again.
Clean the water-inlet filter (see “Cleaning the wa-
ter-inlet filter” under “Cleaning and care”).
The water-connection pressure is lower than
7.25psi (50kPa).
Consult a plumber.
The on-site connection for the water drain may be
too low and you will need to raise the water drain
(see “Hose installation” under “Installation”).
Fault F18
A technical fault has occurred.
Turn off the dishwasher.
Close the faucet.
Contact Miele Customer Service.