Owner's Manual

Additional settings
63
Opening the "Additional settings" menu
To open the "Additional settings" menu:
 Turn the dishwasher off.
 Press and hold the  button and turn the dishwasher back on
using the
 button.
After that, the display will show the following, for example:
Menu
Settings 
Additional settings
If the  button is pressed in this menu, the dishwasher will revert
t
o normal operation.
 Select Additional settings an
d
press
OK t
o open the relevant menu.
This menu can be protected with a PIN code (see "Additional
settings, Code").
– Code
PIN code assignment and settings (see "Code")
– Log book
Displays consumption level
s for agents used and operating hours
(see "Log book")
– Temperature unit
Setting of the temper
ature unit between °C and °F (see
"Temperature unit")
– Move program
P
r
ograms can be allocated to the shortcut buttons (see "Move
program")
– Additional functions
Adapta
tion of program parameters such as water intake, interim
rinses, temperatures, and holding times, as well as detergent
concentration levels for the DOS modules (see "Additional
functions")
– Release program
Determination of the visibility of individual programs on the display
(see "Program release")
– Water hardness
Setting of the w
ater hardness level (see "Water hardness" and
"Water softener")
– Display view
Setting of the display between the target and actual
temperatures
(see "Display view")
Options in the
Additional
Settings menu