Operating Instructions

Warning and Safety instructions
12
Correct installation
Do not install this dishwasher in an area where there is a risk of
explosion or freezing conditions.
Be careful when installing the dishwasher. Wear protective
gloves to avoid injury on any sharp metal components.
To ensure the stability of built-under dishwashers, they must only
be installed beneath a continuous worktop that is bolted to the
adjacent cabinetry.
In order to reduce the risk of damage from condensation, the
furniture in the area around the dishwasher should be designed for
commercial use.
The door springs on either side need to be evenly adjusted. They
are correctly adjusted if the half-opened door (approx. 45° door
opening angle) remains in this position when it is released. The door
must not fall down under its own weight. The dishwasher may only
be used with correctly adjusted door springs.
Technical safety
This dishwasher must only be installed, commissioned, repaired
and maintained by Miele Professional Service or a suitably qualified
service technician. Installation, repairs and other work by unqualified
persons could be dangerous and Miele will not be held liable.
In the case of commercial dishwashers, they must only be
operated by appropriately trained personnel. They must be
instructed and trained regularly.
Before using the dishwasher, check it for any externally visible
damage. Under no circumstances should you use a damaged
appliance. A damaged appliance could be dangerous.
In the event of a damaged or leaking dishwasher, switch off at the
mains immediately and call Miele Professional Service or a suitably
qualified service technician.