Operating Instructions

Operation
44
Switching on
 Make sure the spray arms are not
obstructed.
 Close the door.
 Turn on the tap if it is turned off.
 Press the  button for at least
2seconds.
The programme selected will appear
briefly in the display and the relevant
indicator light will come on.
Finally, the display will show the
estimated programme duration for the
programme selected.
The Start indicator light will flash.
Switch the Memory function on (see
“Settings menu - Memory”) if you
want the last programme selected to
remain selected instead of the ECO
programme.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
 Use the programme selector button
 to select the programme required.
The indicator light next to the selected
programme will come on.
During the course of the programme
you can use OK to display the name of
the programme which is currently
running.
You can now select programme options
(see “Programme options”).
If any programme options are selected,
the appropriate indicator lights will also
light up.
Starting the programme
 Press the Start or OK button.
The programme will begin.
The Start indicator light will come on.
A programme should only be
cancelled in the first few minutes, if
at all. Otherwise important
programme stages could be omitted.