Instructions

Commissioning
22
Water hardness
The display will change to the screen
for setting the water hardness.
– The dishwasher must be
programmed to the correct water
hardness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 1.8 and 2.7mmol/l (10-
15°d - German scale), always
programme the dishwasher to the
higher value (2.7mmol/l or 15°d in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________mmol/l
The dishwasher is programmed at the
factory for a water hardness level of 2.7
mmol/l (15 °d - German scale).
 Use the  arrows to select the
hardness of your water supply and
confirm with OK.
See “Settings menu - Water hardness”
for more information.
Finally, the information Miele@home
enabled and Set up finished will appear in
the display.
After confirming these prompts with
OK, the messages Add salt and
Add rinse aid may appear.
 Add salt and rinse aid if necessary
(see “Commissioning - Dishwasher
salt” and “Rinse aid”).
 Confirm the messages with OK.
The programme selected will appear
briefly in the display and the relevant
indicator light will come on.
Finally, the display will show the
estimated programme duration for the
programme selected.
These basic settings will be saved in
memory after the dishwasher has been
through one complete programme.