Instructions

Commissioning
23
Before using the appliance for
the first time, you require:
– approx. 2 litres of water,
– approx. 2 kg dishwasher salt,
– detergent for commercial
dishwashers,
– rinse aid for commercial
dishwashers.
Suitable products are available from
Miele Professional.
Every dishwasher is tested at the
factory. There will be residual water in
the appliance from this test. It is not
an indication that it has been used
previously.
Dishwasher salt
In order to achieve good cleaning
results, the dishwasher needs to
operate with soft water. Hard water
results in a build-up of calcium deposits
on crockery and in the dishwasher.
Mains water with a hardness level
higher than 0.7mmol/l (4°d - German
scale) needs to be softened. This takes
place automatically in the integrated
water softener. The water softener in
the dishwasher is suitable for a water
hardness level of up to 6.5mmol/l
(36°d - German scale).
The water softener requires reactivation
salt.
If the water in your area is very soft
and constantly lower than 0.9mmol/l
(5°d - German scale), you do not
have to add dishwasher salt. The
prompt to add salt will be switched off
automatically.
 Dishwasher detergent will
damage the water softener.
Do not fill the salt reservoir with
powder or liquid detergent.
 Only use special coarse grained
dishwasher salt for reactivation, or
pure evaporated salt.
Other salts (e.g. cooking salt,
agricultural grade or gritting salt) may
contain insoluble additives which can
impair the functioning of the water
softener.
Suitable products are available from
Miele Professional.