Instructions

Commissioning
25
Add salt reminder
 Fill the salt reservoir with dishwasher
salt for reactivation when Add salt
appears in the display (If it appears
during a programme, wait until the
end of the programme).
 Confirm with OK.
The refill reminder will go out.
 Risk of corrosion!
Immediately after filling the salt
reservoir, run the Cold pre-wash
programme without any crockery in
the dishwasher to remove any traces
of salt from the cabinet.
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. If this is
the case, confirm again with OK.
The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9mmol/l
(5°d - German scale).
If you do not want the refill reminders
to appear, you can switch off both
refill reminders for salt and rinse aid if
you wish (see “Settings menu -
Switching off the refill reminders”).