Instructions

Programme options
49
FlexiTimer with EcoStart
The FlexiTimer gives you three ways
of starting the programme by means of
delaying the start. You can set the start
time or the finish time of a programme.
You also have the option of taking
advantage of time variable economy
rates of electricity using the EcoStart
function.
When using the FlexiTimer, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth if necessary. If the
compartment is wet, powder
detergent can become lumpy and
stick to the dispenser, with the result
that it is not fully dispensed.
 To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme, i.e. before you activate
the FlexiTimer with OK. Also activate
the door safety lock.
 Switch the dishwasher on with the
button.
The Start indicator light will flash.
 Select the required programme.
 Press the  button.
You can use the arrow buttons to
select the Start at, Finish at, EcoStart or
Back  function.
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be
highlighted.
You can now enter the time you want
using the arrow buttons and
confirm with OK.
If, while you are setting the time, you do
not press any buttons for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If the time of day (clock) display has
been switched off (see “Settings menu
- Time of day”), the display will go out
after a few minutes and only the Start
indicator light will flash slowly.
Press any button to switch the display
back on again for a few minutes.